Time-to-market pressure and the ever-growing design complexity of multiprocessor system-on-chips have demanded an efficient design environment that enables fast exploration of large design space. In this article, we introduce a new design environment, called SoCDAL, for accelerating multiprocessor system-on-chip design through fast design-space exploration targeting real-time multimedia systems. SoCDAL is a set of mostly automated tools covering system specification, hardware/software estimation, application-to-architecture mapping, simulation model generation, and system verification through simulation. For system specification, the process network model has been widely used for system specification because of its modeling capability. However, it is hard to use for real-time systems design, since its behavior cannot be estimated statically. We introduce a new approach which enables analyzing a process network model statically with some restrictions. For the hardware/software estimation, we analyze codes statically. Application-to-architecture mapping process implements a novel algorithm to support an arbitrary number of processors, with performance evaluation by static scheduling considering communication behavior. Mapping results are used to generate simulation models automatically at several transaction levels to be pipelined to a commercial tool. We show the effectiveness of our approaches by some experimental results with multimedia applications such as JPEG, H.263, and H.264 encoders, as well as an H.264 decoder.
13 October 2017 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
As the semiconductor process technology continuously scales down, circuit delay variations due to manufacturing and environmental variations become more and more serious. These delay variations are hardly predictable and thus require an additional design margin, which impedes the chance to reduce the area and power consumption of a chip. One of the best solutions to alleviate this problem is to measure circuit delays at run time and control the supply voltage accordingly through a closed-loop dynamic voltage and frequency scaling (DVFS) scheme. The key issue of this scheme is the delay mismatch between the monitoring circuit and the target block. A large delay mismatch might lose the advantage of the closed-loop DVFS. It becomes much worse as a circuit block operates in wider voltage range, from near-threshold voltage to super-overdrive voltage. This paper proposes novel delay monitoring systems with multiple generic monitors for wide voltage range operation, which provide a better delay correlation between the monitoring circuit and the target block compared to conventional monitoring approaches. The proposed approaches reduce the maximum error by up to 91% for a popular processor core in a 14-nm FinFET process technology, thereby bring a decrease of design margin, lower-power, and/or lower-cost design.
As power-efficient design becomes more important, spin-transfer torque RAM (STT-RAM) has drawn a lot of attention due to its ability to meet both high performance and low power consumption. However, its high write energy incurs an increase of dynamic power consumption and may offset power saving due to its low static power. This paper proposes a novel technique called lower-bits caches for reducing write activities of STT-RAM L2 caches. Based on the observation that upper bits of data are not changed as frequently as lower bits in most applications, the technique tries to hide frequent bit changes in lower bits from the L2 cache. Experimental results show that our architecture reduced 25 percent of energy consumed by the L2 cache and slightly improved performance at the same time compared to the STT-RAM baseline.