Porous titanium is a functional structural material with certain porosity, which is prepared from titanium powder and titanium fiber. In order to study the porosity, phase structure, microstructure, sintering mechanism and mechanical properties of porous titanium obtained by spark plasma sintering of a Ti powder–fiber mixture at different sintering temperatures, a spherical titanium powder (D50 of 160 μm) was prepared via plasma rotating electrode processing, and titanium fiber (average wire diameter of fiber of 110 μm) was prepared by drawing, and they were mixed as raw materials according to different mass ratios. Porous titanium with a fiber–powder composite porous structure was prepared by spark plasma sintering at sintering temperatures of 800 °C, 900 °C and 1000 °C under a sintering pressure of 20 MPa. The results showed that there were no new phases occurring in porous titanium with porosity of 1.24–24.6% after sintering. Titanium fiber and titanium powder were sintered using powder/powder, powder/fiber and fiber/fiber regimes to form composite pore structures. The mass transfer mechanism of the sintered neck was a diffusion-dominated material migration mechanism during sintering. At higher sintering temperatures, the grain size was larger, and the fiber (800 °C; 10–20 μm) was finer than the powder (800 °C; 10–92 μm). The stress–strain curve of porous titanium showed no obvious yield point, and the compressive strength was higher at higher sintering temperatures. The results of this paper can provide data reference for the preparation of porous titanium obtained by spark plasma sintering of a Ti powder–fiber mixture.
Porous titanium samples with a porosity of 1.34~15.54% were prepared by a spark plasma sintering (SPS) process at sintering temperatures of 800 °C, 850 °C and 900 °C, and a sintering pressure of 10 MPa. The microstructures and fracture morphology of the samples were investigated by scanning electron microscopy (SEM) and X-ray diffraction (XRD) analyses. The compressive strength and elastic modulus were likewise measured. The results showed that no new phase occurred after the samples were sintered, and the main phases were α phase of hcp structure. The porosity of the samples decreased significantly with the increase of sintering temperature. At 800 °C, the sample phase was dominated by equiaxed α. There were more irregular coarse pores in the samples. At 850 °C, the microstructure was mainly zigzag α, and the pores were finely and relatively uniform in distribution. At 900 °C, the sample’s structure transformed into a dense sheet-like α. The sample’s densities increased and the pores disappeared. The room temperature compression test showed that the porous titanium sintered by SPS had excellent compressive strength. The yield strength, compressive strength, compressive strain and elastic modulus were 81.85~122.36 MPa, 161.65~498.86 MPa, 36.75~59.97% and 2.79~4.22 GPa, respectively.
31 January 2020 in Journal of Central South University