Multi-point flexible stretch-forming process applies the idea of discretization to the die and clamp of stretch-forming, so that the die and clamp have high flexibility at the same time. Because the surface of the multi-point die is discontinuous, the sheet metal will produce the dimple during the forming process, which will affect the forming effect. To suppress the dimple, this paper takes parabolic spherical parts as the research object, and discusses the influence of swinging unit and discrete elastic cushion on the dimples of forming parts by numerical simulation. The results show that the strain and thickness distribution are more uniform and the dimples on the surface of the forming parts are obviously reduced when the swinging unit is used. The use of discrete elastic cushions on the fixed unit and the swinging unit can further suppress the dimples of the forming part and improve the forming accuracy. To verify the correctness of the numerical simulation, the multi-point die for swinging unit with discrete elastic cushion was used to carry out the flexible stretch-forming test of the parabolic spherical part. The test results are in agreement with the numerical simulation results, which shows that the methods are reliable and feasible.
The discrete clamp is used to replace the integral clamp in the traditional stretch forming process, and the stretch forming process of complex curved parts is studied. With the trapezoidal profile part and the double curved top part as the research objects, numerical simulation of the stretch forming process with the integral clamp and the discrete clamp is carried out respectively. The numerical simulation results show that: compared with the integral clamp, it is easier for the trapezoidal profile part to fit the die during stretch forming with the discrete clamp, and the distribution of strain and thickness of the formed part is more uniform; during forming of the double curved top part, with the same forming force, the sheet metal can not fit the die completely with the integral clamp forming, while it can completely fit the die during stretch forming with the discrete clamp. When the forming force of the integral clamp is increased, the sheet metal still can not fit the die completely, and the sheet metal is more likely to crack. Stretch forming tests are conducted for the trapezoidal profile part and the double curved top part with the discrete clamp stretch forming device, and good forming effect is realized, which is consistent with the numerical simulation results.
To improve the effect of multi-point stretch forming of sheet metal, it is proposed in this paper to replace fixed ball head with swinging ball head. According to the multi-point dies with different arrangements, this research establishes the finite element models of the following stretch forming, i.e. fixed ball heads with conventional arrangement, swinging ball heads with conventional arrangement, swinging ball heads with declining staggered arrangement, and swinging ball heads with parallel staggered arrangement and then numerical simulation is performed. The simulation results show that by replacing fixed ball head with swinging ball head, the surface indentation of the formed part was effectively suppressed, the stress and tension strain distribution of the formed part was improved and the forming quality was improved; that the thickness of the elastic pad was reduced, the springback was reduced and the forming accuracy was improved; and that when the ball head was applied to multi-point die with staggered arrangement, better forming result was achieved, where the best forming result was achieved in combining the swinging ball heads with the multi-point die with parallel staggered arrangement. The forming experiments were carried out, and the experimental results were consistent with the trend of numerical simulation results, which verified the correctness of the numerical simulation.