The fracture characteristics of woven carbon fiber reinforced polymer (CFRP) under Mode I and III loading were analyzed. Two tensile testing configurations and experimental methods for simple tests under Mode I and III were employed. The Double Cantilever Beam (DCB) configuration allows for fracture characterization in pure Mode I considering the same specimen arms, using the TDCB model as the specimen’s far-field boundary. Under pure Mode III loading, out-of-plane tension at the end notch was used for fracture characterization. For curve testing, curves of Mode I and Mode III Tapered Double Cantilever Beam (TDCB) specimens were obtained with the assistance of infrared sensors and a servo control algorithm. During crack propagation, the stress state in the stress singularity region on crack tip was captured in detail using digital image correlation (DIC) technology. Finally, a mode partitioning method based on Cohesive Zone Model (CZM) was used for the simulation and accuracy prediction of Mode I and III mixed-mode crack propagation. These methods effectively simulated and studied the fracture behavior of composites under complex stress conditions, and provide insights into composite fracture behavior under complex stress, crucial for aerospace and automotive applications where CFRP enhances safety, reliability, and fuel efficiency.
11 May 2023 in Journal of Thermoplastic Composite Materials
An orthogonal mixture woven composites with aramid yarns and carbon yarns are investigated in this work. A dual-scale computational homogenization algorithm is also proposed to address the cross-scale numerical problems. Models and methods for mesoscale and macroscale are illustrated separately. Two types of meso-structures are selected for comparison, which are termed as representative unit cell (RUC) and equivalent cross-ply laminate (ECPL), and the corresponding macro-structures are referred to as RUCs and equivalent cross-ply laminate plain-woven composites (ECPL-PWC). The key finds clarified that the ECPL-PWC takes more computational expenses compared with the RUCs, but the RUCs is in acceptable agreement with testing results, as well as the evaluation results of the ECPL-PWC would obtain very satisfactory accuracy through minor numerical adjustments. The final finite element damage results reveals that the RUCs is more accurate for local damage assessment, while the ECPL-PWC is better for global damage analysis.
Dear Author, Thank you for submitting your manuscript titled "Sugar Mills and Second Generation Lactic Acid Production: Challenges and Opportunities". We appreciate your detailed discussion on the advantages and challenges of utilizing second genera...