Surface phase with ion or electron conductor is essential for the improved rate capability of mostly electronically insulating LiFePO4 materials with only one-dimensional Li+ transport. Here, a surface conductive phase, created through Zr4+ doping in Li-excess LiFePO4, forms synergy with carbon coating layer to facilitate electron transportation, which greatly improved rate performance of LiFePO4 materials. The LiFePO4 with appropriate amount of surface conductive phase exhibits excellent rate capability with 125 mA·h·g−1 at 20 C and stable capacity retention with 98.5% for 200 cycles at 5 C. The finding provides a new idea for improved electrochemical performances of LiFePO4 materials and contributes to the scaled-up production of LiFePO4 materials for a low-cost route.
Hydroquinone (HQ) and catechol (CT) are considered as environmental pollutants with high toxicity. We have developed a simple electrochemical sensor using an anodized glassy carbon electrode modified with a stable 2-(phenylazo) chromotropic acid- (CH-) conducting polymer (PCH/AGCE). The PCH/AGCE sensor showed good electrocatalytic activity and reversibility towards the redox of HQ and CT in phosphate buffer solution (PBS, pH 7.0). The cyclic voltammetry (CV) in mixed solution of HQ and CT showed that the oxidation peaks of them became well resolved with a peak separation of 0.1 V. The detection limits of HQ and CT were 0.044 and 0.066 μM, respectively, in a wide linear response range of 1–300 μM for both. Moreover, the sensor displayed an excellent selectivity in the presence of common interferences. This study provided a simple, sensitive, and high recovery method for simultaneous and quantitative determination of HQ and CT in aqueous medium.
The coexistence of dopamine (DA) and acetaminophen (AC) in living organisms leading to an unexpected mutual interference in electrochemical detection techniques demands a simultaneous, selective as well as simple and cost-effective approach for DA and AC. Herein, a novel nanocomposite was fabricated by integrating carbonized ZIF-67 (C-ZIF-67) with carbon black Super P (SP) and introduced onto a glassy carbon electrode (GCE) to form a highly sensitive electrochemical sensor (C-ZIF-67/SP/GCE) for the simultaneous determination of DA and AC. The well-prepared nanomaterial presents a polyhedral morphology interlaced on a reticulated chain. C-ZIF-67/SP/GCE shows excellent electrocatalytic activity towards the redox reactions of DA and AC in a dynamic linear range up to 100 μM, which could be attributed to the synergistic effect of the large specific surface area of C-ZIF67 and the excellent conductivity of SP. The limits of detection (LODs, S/N = 3) of 0.58 μM and 0.27 μM were obtained for DA and AC, respectively. Moreover, the developed sensor exhibited good reproducibility and long-term stability. The C-ZIF-67/SP/GCE was employed to analyze DA and AC biomedical samples and satisfactory recoveries were achieved. This approach provides a simple, easy and sensitive method to detect DA and AC simultaneously and selectively.
The increasing incidence of diseases caused by highly carcinogenic aflatoxin M1 (AFM1) in food demands a simple, fast, and cost-effective detection technique capable of sensitively monitoring AFM1. Recent works predominantly focus on the electrochemical aptamer-based biosensor, which still faces challenges and high costs in experimentally identifying an efficient candidate aptamer. However, the direct electrochemical detection of AFM1 has been scarcely reported thus far. In this study, we observed a significant influence on the electrochemical signals of ferric ions at a gold nanoparticle-modified glassy carbon electrode (AuNPs/GCE) by adding varying amounts of AFM1. Utilizing ferricyanide as a sensitive indicator of AFM1, we have introduced a novel approach for detecting AFM1, achieving an unprecedentedly low detection limit of 1.6 × 10−21 g/L. Through monitoring the fluorescence quenching of AFM1 with Fe3+ addition, the interaction between them has been identified at a ratio of 1:936. Transient fluorescence analysis reveals that the fluorescence quenching process is predominantly static. It is interesting that the application of iron chelator diethylenetriaminepentaacetic acid (DTPA) cannot prevent the interaction between AFM1 and Fe3+. With a particle size distribution analysis, it is suggested that a combination of AFM1 and Fe3+ occurs and forms a polymer-like aggregate. Nonetheless, the mutual reaction mechanism between AFM1 and Fe3+ remains unexplained and urgently necessitates unveiling. Finally, the developed sensor is successfully applied for the AFM1 test in real samples, fully meeting the detection requirements for milk.