Purpose: Solar photovoltaic (PV) is commonly used as a renewable energy source to provide electrical power to customers. This research establishes a method for testing the performance reliability of large grid-connected PV power systems. Solar PV can turn unrestricted amounts of sunlight into energy without releasing carbon dioxide or other contaminants into the atmosphere. Because of these advantages, large-scale solar PV generation has been increasingly incorporated into power grids to meet energy demand. The capability of the installation and the position of the PV are the most important considerations for a utility company when installing solar PV generation in their system. Because of the unpredictability of sunlight, the amount of solar penetration in a device is generally restricted by reliability constraints. PV power systems are made up of five PV modules, with three of them needing to be operational at the same time. In other words, three out of five. Then there is a charge controller and a battery bank with three batteries, two of which must be consecutively be in operation. i.e. two out of three. Inverter and two distributors, all of which were involved at the same time. i.e. two out of two. In order to evaluate real-world grid-connected PV networks, state enumeration is used. To measure the reliability of PV systems, a collection of reliability indices has been created. Furthermore, detailed sensitivity tests are carried out to examine the effect of various factors on the efficiency of PV power systems. Every module's test results on a realistic 10-kW PV system. To see how the model works in practice, many scenarios are considered. Tables and graphs are used to show the findings.Design/methodology/approach: The system of first-order differential equations is formulated and solved using Laplace transforms using regenerative point techniques. Several scenarios were examined to determine the impact of the model under consideration. The calculations were done with Maple 13 software.Findings: The authors get availability, reliability, mean time to failure (MTTF), MTTF sensitivity and gain feature in this research. To measure the reliability of PV systems, a collection of reliability indices has been created. Furthermore, detailed sensitivity tests are carried out to examine the effect of various factors on the efficiency of PV power systems.Originality/value: This is the authors' original copy of the paper. Because of the importance of the study, the references are well-cited. Nothing from any previously published articles or textbooks has been withdrawn.

Several studies on photovoltaic systems focused on how it operates and energy required in operating it. Little attention is paid on its configurations, modeling of mean time to system failure, availability, cost benefit and comparisons of parallel and series–parallel designs. In this research work, four system configurations were studied. Configuration I consists of two sub-components arranged in parallel with 24 V each, configuration II consists of four sub-components arranged logically in parallel with 12 V each, configuration III consists of four sub-components arranged in series–parallel with 8 V each, and configuration IV has six sub-components with 6 V each arranged in series–parallel. Comparative analysis was made using Chapman Kolmogorov’s method. The derivation for explicit expression of mean time to system failure, steady state availability and cost benefit analysis were performed, based on the comparison. Ranking method was used to determine the optimal configuration of the systems. The results of analytical and numerical solutions of system availability and mean time to system failure were determined and it was found that configuration I is the optimal configuration.