The penetration of microwave power inside a human head model is improved by employing a dielectric loaded rectangular waveguide as the transmission source. A multi-layer reflection model is investigated to evaluate the combined material characteristics of different lossy human head tissues at 2.45 GHz. A waveguide loaded with a calculated permittivity of 3.62 is shown to maximise the microwave power penetration at the desired frequency. A Quartz (SiO₂) loaded rectangular waveguide fed by a microstrip antenna is designed to validate the power penetration improvement inside an inhomogeneous human head phantom. A measured 1.33 dB power penetration increment is observed for the dielectric loaded waveguide over a standard rectangular waveguide at 50 mm inside the head, with an 81.9% reduction in the size of the transmission source.

Analysis of the resonance response improvement of a planar C-band (4–8 GHz) antenna is proposed using parasitic element method. This parasitic element based method is validated for change in the active and parasitic antenna elements. A novel dual-band antenna for C-band application covering 5.7 GHz and 7.6 GHz is designed and fabricated. The antenna is composed of circular parasitic element with unequal microstrip lines at both sides and a rectangular partial ground plane. A fractional bandwidth of 13.5% has been achieved from 5.5 GHz to 6.3 GHz (WLAN band) for the lower band. The upper band covers from 7.1 GHz to 8 GHz with a fractional bandwidth of 12%. A gain of 6.4 dBi is achieved at the lower frequency and 4 dBi is achieved at the upper frequency. The VSWR of the antenna is less than 2 at the resonance frequency.

A novel compact broadband patch antenna for UHF (ultrahigh frequency), RFID (radio frequency identification), and GSM-900 (global system for mobile communications) band is shown in this paper. The antenna is composed of an ellipse shape annular ring at the patch. The ground plane of the planar antenna is modified with a semiellipse shape slot. The structure can generate substantial amount of current at the feed-line. The geometry of the antenna is evaluated by using HFSS simulation software and deliberated across the paper. Parametric study is exhibited to delineate the response change of the antenna. The antenna has a physical width of 0.24 λand length of 0.3 λ. It covers a frequency starting from 0.9 GHz to 1.08 GHz. A fractional bandwidth of 18.2% has been achieved from 0.9 GHz till 1.08 GHz. An average gain of 5.5 dBi is achieved at the resonance frequency. The simulated and measured results have good agreement.

We propose a metasurface structure integrated at the aperture of a flanged rectangular waveguide to produce dual-beam radiation. The dual beams are anti-parallel in an orientation and perpendicular to the boresight direction. The metasurface is backed by a dielectric slab to produce a substrate integrated waveguide-like response above the flange. The metasurface is engineered to limit the boresight emission from the waveguide aperture, as well as to allow symmetric wave splitting between the metasurface and waveguide flange. A lens-like end texturing involving surface tapering and electromagnetic bandgap (EBG) cells is utilized to enhance the beam directivity at end fire from the flange. The dual-beam radiation exists for all frequencies between 10.5 GHz and 12.4 GHz. The proposed design is modeled via full-wave simulation in commercial software, then validated through the measurement of a fabricated prototype.

A microstrip patch antenna for multiple LTE (long term evaluation) frequency bands for femtocell application is proposed in this paper. Distributed antenna solution (DAS) has been introduced in cellular network to achieve homogenous indoor coverage. Femtocell is the latest extension to these solutions. It is a smart solution to both coverage and capacity scales. Femtocell operation in LTE band is occupied by higher frequency bands. For multiband femtocell application, miniature antenna design is quite essential. The antenna proposed here is composed of basic monopole structure with two parasitic elements at both sides of the active element. A rectangular slot is introduced at the ground plane of the proposed antenna. The antenna is designed using ElnoS HK light CCL substrate material of relative permittivity of 9.4, dielectric loss-tangent of 0.003 and thickness of 3 mm. The S₁₁response of the antenna is shown to have a bandwidth of 1.01 GHz starting from 1.79 GHz to 2.8 GHz. The characteristics of the antenna are analysed using Ansoft HFSS software.