Carbon quantum dots (CQDs) are known for their intriguing optical properties, low toxicity, and high biocompatibility, which make them promising for biomedical applications. In this study, CQDs were synthesized by subjecting orange juice to microplasma as a carbon source at atmospheric pressure and low temperatures. The resulting CQDs exhibited a narrow size distribution, with an average diameter of approximately 4.5 nm and a pH value of 5.67. These CQDs exhibited strong blue emission characteristics. The antibacterial properties of the CQDs against Escherichia coli (E. coli) strains were evaluated using minimum inhibitory concentration assays. The study revealed that an effective inhibition of E. coli was achieved at a minimum inhibitory concentration of 0.1 ppm, while the minimum bactericidal concentration for this bacterial strain was 1 ppm, resulting in an average antibacterial efficacy of 57%. Notably, the antibacterial effects of the CQDs were observed without the need for additional light or oxidants, demonstrating the applicability of CQDs in combating bacterial strains.
We report the potential of lanthanum fluoride (LaF 3 ) as a fast-response scintillator. When excited by an extreme ultraviolet free electron laser, neodymium-doped LaF 3 (Nd 3+ :LaF 3 ) exhibited a 1.9 ns fast decay component and a 6.7 ns slow decay component for its 172 nm emission peak. The slow decay component is due to interconfigurational 4f 2 5d-4f 3 transition in Nd 3+ . First principles density functional theory calculations using the Perdew–Burke–Ernzerhof hybrid functional including exact exchange (PBE0) and the Green’s function and screened Coulomb interaction (GW) approximation as implemented in the Vienna Ab initio Simulation Package using plane-wave basis sets within the projector-augmented wave method elucidate the electronic structure of LaF 3 and reveal that the fast decay component could be due to partial cross luminescence (CL) from the bottom of the valence band to the top of the outermost core band. The presence of CL alludes to the potential of LaF 3 as a fast-response scintillator.
We investigate the structural, electronic, optical, and thermoelectric properties of three compositions of Mo2C-MXenes (Mo2CF2, Mo2C(OH)2, and Mo2CO2) from monolayer to multilayer by first principles calculation within Density Functional Theory (DFT) and Boltzmann transport theory. Firstly, the atomic structures of Mo2C-MXenes are optimized, and their respective structures are created with comparative research. Secondly, their electronic band structures and optical properties are studied in detail. The estimation of the bandgap energy of Mo2C-MXenes with its functionalization reveal that most Mo2CF2 and Mo2C(OH)2 layers are semiconductors, while Mo2CO2 behaves as a metal. The electrical and optical properties can be altered by controlling the on-surface functional groups and the number of layers. Computation of the thermoelectric (TE) properties of Mo2C-MXenes reveals that, upon heating to 600 K, Mo2CF2 and Mo2C(OH)2 exhibit a high Seebeck coefficient and a relatively high electrical conductivity. The Seebeck coefficient reaches ~400 µV K−1 at room temperature for all layers of Mo2CF2 MXenes. Our results prove that Mo2CF2 is considered a promising material for thermoelectric devices, while Mo2CO2 does not possess better thermoelectric performance. Mo2C-MXenes from monolayer to multilayer have outstanding properties, such as flexible bandgap energy and high thermal stability, making them promising candidates for many applications, including energy storage and electrode applications.
Aflatoxins are secondary metabolites of Aspergillus flavus and Aspergillus parasiticus. These fungal species are the most dangerous and common toxin group causing food contamination. Aflatoxin has high toxicity and can cause cancer to humans and animals. The quantitative detection of aflatoxin in food, therefore, plays a very important role. However, in practice, due to low concentrations, aflatoxin detection analysis methods need to be highly sensitive and simple to apply. In this report, the fluorescence resonance energy transfer method (FRET) adopts the donor–acceptor interaction of aflatoxin B1. The CdSe/ZnS quantum dot detection of aflatoxin B1 will be presented wherein the aflatoxin B1 concentration can be determined from the changes in fluorescence lifetime or fluorescence intensity. A fluorescence lifetime calibration curve versus aflatoxin B1 concentrations was established. Test results of aflatoxin B1 determination in maize in Vietnam by FRET method are consistent with the results of aflatoxin B1 determination by HPLC based on ppm concentration.
The single-pass one-step method for printing conductive silver tracks on a glass surface, using the laser-induced forward transfer (LIFT) technique, was proposed, providing a unique opportunity for high-throughput printing of surface micro- and nanostructures with high electrical conductivity and positioning accuracy. This method was developed via our multi-parametric research, resulting in the selection of the optimal material, laser irradiation, and transfer conditions. Optical, scanning and transmission electron, and atomic force microscopy methods, as well as X-ray diffraction, were used to characterize the surface structure and phase state of the printed structures, while energy-dispersive X-ray and X-ray photoelectron microscopy were employed for their chemical microanalysis. Depending on the laser irradiation parameters, the specific electrical conductivity of the printed tracks varied from 0.18 to 83 kS/cm, approaching that of donor magnetron-sputtered films. This single-pass one-step method significantly facilitates fast, large-scale, on-demand local laser printing of metallic (sub)microcomponents of microelectronic devices.