Mohamed Saeed Elsayed

Mr. Mohamed Saeed Elsayed

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 December 2021 in Advanced Materials
Verified
Journal Article
Open access
PDF file
MEMohamed Saeed Elsayed
Mohamed Saeed Elsayed
PPPaula Palacios
Paula Palacios
MWMuh‐Dey Wei
Muh‐Dey Wei
EBEyyub Baskent
Eyyub Baskent
CFChun‐Yu Fan
Chun‐Yu Fan
RNRenato Negra
Renato Negra
Over the past two decades, research on 2D materials has received much interest. Graphene is the most promising candidate regarding high‐frequency applications thus far due to is high carrier mobility. Here, the research about the employment of graphene in micro‐ and millimeter‐wave circuits is reviewed. The review starts with the different methodologies to grow and transfer graphene, before discussing the way graphene‐based field‐effect‐transistors (GFETs) and diodes are built. A review on different approaches for realizing these devices is provided before discussing the employment of both GFETs and graphene diodes in different micro‐ and millimeter‐wave circuits, showing the possibilities but also the limitations of this 2D material for high‐frequency applications.

16 November 2017 in Nanoscale
Verified
Journal Article
Closed access
PDF file
MEMohamed Saeed Elsayed
Mohamed Saeed Elsayed
AHAhmed Hamed
Ahmed Hamed
ZWZhenxing Wang
Zhenxing Wang
MSMehrdad Shaygan
Mehrdad Shaygan
DNDaniel Neumaier
Daniel Neumaier
RNRenato Negra
Renato Negra
This work demonstrates a design approach which enables the fabrication of fully integrated radio frequency (RF) and millimetre-wave frequency direct-conversion graphene receivers by adapting the frontend architecture to exploit the state-of-the-art performance of the recently reported wafer-scale CVD metal–insulator–graphene (MIG) diodes.

22 May 2019 in ACS Applied Electronic Materials
Verified
Journal Article
Closed access
ZWZhenxing Wang
Zhenxing Wang
BUBurkay Uzlu
Burkay Uzlu
MSMehrdad Shaygan
Mehrdad Shaygan
MOMartin Otto
Martin Otto
MRMário Ribeiro
Mário Ribeiro
DNDaniel Neumaier
Daniel Neumaier

24 January 2022 in Advanced Materials
Verified
Journal Article
Open access
PDF file
EREros Reato
Eros Reato
PPPaula Palacios
Paula Palacios
BUBurkay Uzlu
Burkay Uzlu
MEMohamed Saeed Elsayed
Mohamed Saeed Elsayed
AGAnnika Grundmann
Annika Grundmann
MLMax Lemme
Max Lemme
The design, fabrication, and characterization of wafer‐scale, zero‐bias power detectors based on 2D MoS2 field‐effect transistors (FETs) are demonstrated. The MoS2 FETs are fabricated using a wafer‐scale process on 8 μm‐thick polyimide film, which, in principle, serves as a flexible substrate. The performances of two chemical vapor deposition MoS2 sheets, grown with different processes and showing different thicknesses, are analyzed and compared from the single device fabrication and characterization steps to the circuit level. The power‐detector prototypes exploit the nonlinearity of the transistors above the cut‐off frequency of the devices. The proposed detectors are designed employing a transistor model based on measurement results. The fabricated circuits operate in the Ku‐band between 12 and 18 GHz, with a demonstrated voltage responsivity of 45 V W−1 at 18 GHz in the case of monolayer MoS2 and 104 V W−1 at 16 GHz in the case of multilayer MoS2, both achieved without applied DC bias. They are the best‐performing power detectors fabricated on flexible substrate reported to date. The measured dynamic range exceeds 30 dB, outperforming other semiconductor technologies like silicon complementary metal–oxide–semiconductor circuits and GaAs Schottky diodes.

18 May 2018 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
MEMohamed Saeed Elsayed
Mohamed Saeed Elsayed
AHAhmed Hamed
Ahmed Hamed
ZWZhenxing Wang
Zhenxing Wang
MSMehrdad Shaygan
Mehrdad Shaygan
DNDaniel Neumaier
Daniel Neumaier
RNRenato Negra
Renato Negra
In this letter we present for the first time a mixer circuit based on Metal-Insulator-Graphene (MIG) diodes, fabricated with large scale monolayer graphene grown by chemical vapor deposition. A small-signal model extracted from the diode physical structure is used together with a large-signal model extracted from the DC characteristics of the MIG diode to build a down-conversion mixer. The measured conversion loss (CL) at a local oscillator power (PLO) of 5 dBm is lower than 15 dB, while RF-to-IF isolation is 36 dB with an input return loss (RL) and RF-to-LO isolation better than 10 dB over the frequency band from 1.7 – 6 GHz. Promising mixer results in combination with the CVD-based process promote the MIG diode-based mixer to be used in low-power, low-cost, microwave and millimetre-wave circuit applications.

24 January 2018 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
MEMohamed Saeed Elsayed
Mohamed Saeed Elsayed
AHAhmed Hamed
Ahmed Hamed
ZWZhenxing Wang
Zhenxing Wang
MSMehrdad Shaygan
Mehrdad Shaygan
DNDaniel Neumaier
Daniel Neumaier
RNRenato Negra
Renato Negra
In this paper, we report the design, fabrication, and demonstration of a compact, V-band, zero-bias, and linear-in-dB power detector based on our in-house metal-insulator-graphene diode fabricated on a glass substrate. The presented circuit is optimized for the frequency band of 40-75 GHz. The measured prototype shows a repeatable measured dynamic range of at least 50 dB with down to -50 dBm sensitivity on 500-μm-thick quartz substrate. It also shows input return loss better than -9.5 dB over the entire design bandwidth. The measured tangential responsivity for the fabricated circuit on glass is 168 V/W at 2.5 GHz and 15 V/W at 60 GHz. The obtained results together with the robust device fabrication based on chemical vapor deposition graphene promote the proposed scheme and device for repeatable, statistically stable millimeter-wave, and submillimeter-wave applications.