Influence of the combined effect of ultra-sonication (US) and high-voltage cold plasma treatment (HVCP) on the quality parameters of fresh carrot juice has been studied. During the treatment of ultra-sonication, carrot juice was subjected to a 0.5 inch probe for 3 min by adjusting the pulse duration 5 s on and off at 20 kHz frequency, amplitude level 80%. The ultrasound intensity was measured by using a thermocouple and was 46 Wcm⁻². The temperature was maintained at 10 °C by an automatic control unit. During the treatment of HVCP, carrot juice was then subjected to dielectric barrier discharge (DBD) plasma discharge at 70 kV voltage for 4 min. Significant increases were observed when HVCP treated carrot juice was tested against total carotenoids, lycopene, and lutein when compared to the control treatments. Moreover, this increase was raised to its highest in all pigments, chlorogenic acid, sugar contents, and mineral profile, as the results of ultra-sonication when combined with high voltage atmospheric cold plasma (US-HVCP). Whereas, a significant decreased was observed in Mg, total plate count, yeast, and mold after US-HVCP treatment. Furthermore, results indicated that the combined effect of US-HVCP treatment has improved the quality and led to a higher concentration of lycopene, lutein, chlorogenic acid, and mineral compounds (Na, K, and P). Therefore, the findings of the current study suggested that US-HVCP treatment is a novel combined technique that could provide better quality and more stability during the processing of carrot juice with better physicochemical properties and bio-available nutrients, so this novel processing technique could serve as an alternative to traditional processes.

This work provides an optimized extraction approach intended to maximize the recovery of dihydromyricetin (DHM) from Chinese vine tea (Ampelopsis grossedentata) leaves. The presented work adopts a Box-Behnken design as a response surface methodology to understand the role and influence of specific extraction parameters including: time, temperature, and solvent composition/ethanol (%) on DHM final yields. Initially, single factor experiments were used to delineate the role of above factors (temperature, time, and solvent composition) before proceeding with three factors-three levels Box-Behnken design with 17 separate runs to assess the effect of multifactorial treatments on DHM recovery rates. The collected data shows that independent variables (solvent composition, time, and temperature) can significantly affect DHM recovery rates with maximum yields resulting from a combined 60 °C, 60% aqueous ethanol, and 180 min treatment. From the empirical point of view, the above optimized extraction protocol can substantially enhance processing and profitability margins with a minimum need of interventions or associated costs.