With the development of high-efficiency and high-power LEDs, they have become the most energy-efficient and environmentally friendly artificial light source. Phosphor-converted white LEDs are currently mainstream in the market. The remote phosphor is an effective way to enhance the conversion efficiency and lifetime of phosphor-converted LEDs. For applications of high-quality lighting and LCD backlights, the uniformity of angular correlated color temperature (CCT) is very important. This report explored a remote phosphor white LED with low angular CCT variance and high luminous efficiency by using TiO2 diffuser-loaded encapsulation. Experimental results revealed that for the TiO2 diffuser-loaded encapsulation remote phosphor white LED, the angular color uniformity could be improved by 31.82% and the luminous flux by 8.65%. Moreover, the mean CCTs of the TiO2 diffuser-loaded encapsulation and non-diffuser remote phosphor white LEDs were similar at a driving current of 350 mA. Finally, we showed that incorporating the TiO2 diffuser into the phosphor layer of the remote phosphor white LEDs, does not influence the reliability of the LED.
A direct LED backlight unit (DLBLU) with extended sources based on an analytical design method of uniform illumination is investigated. We developed an analytical calculation method of the light spread function (LSF) for achieving highly uniform illumination into the diffuser plate (target plane) of a DLBLU. The effect of the rays reflected by the sides of the backlight box was also considered and calculated using the LSF. When comparing the results calculated using the LSF method at y = x and y = 0 with the results from the optical design software, the mean absolute percentage error (MAPE) were 0.74% and 0.46%, respectively. To demonstrate the effectiveness of the LSF method, a DLBLU model with 36 batwing sources was designed using the LSF method and assembled. The measurement result for DLBLU uniformity was 96.68%. When comparing the measurement result with the results of the LSF method at y = x and y = 0, the MAPEs were 0.92% and 0.46%, respectively. Thus, the proposed design method is an effective method for designing a DLBLU.
Besides the application of the photonic crystal for the photodetector in the visible range, the infrared devices proposed with subwavelength structure are numerically and experimentally investigated thoroughly for infrared radiation sensing in this research. Several complementary metal oxide semiconductor (CMOS) compatible thermopiles with subwavelength structure (SWS) are proposed and simulated by the FDTD method. The proposed thermopiles are fabricated by the 0.35 μm 2P4M CMOS-MEMS process in TSMC (Taiwan Semiconductor Manufacturing Company). The measurement and simulation results show that the response of these devices with SWS is higher than for those without SWS. The trend of the measurement results is consistent with that of the simulation results. Obviously, the absorption efficiency of the CMOS compatible thermopile can be enhanced when the subwavelength structure exists.