Laurent Segers

Mr. Laurent Segers

orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 January 2014 in Sensors
Verified
Journal Article
Open access
PDF file
JTJelmer Tiete
Jelmer Tiete
FDFederico Dominguez
Federico Dominguez
Bruno da SilvaBruno da Silva
Bruno da Silva
LSLaurent Segers
Laurent Segers
KSKris Steenhaut
Kris Steenhaut
Abdellah TouhafiAbdellah Touhafi
Abdellah Touhafi
Sound source localization is a well-researched subject with applications ranging from localizing sniper fire in urban battlefields to cataloging wildlife in rural areas. One critical application is the localization of noise pollution sources in urban environments, due to an increasing body of evidence linking noise pollution to adverse effects on human health. Current noise mapping techniques often fail to accurately identify noise pollution sources, because they rely on the interpolation of a limited number of scattered sound sensors. Aiming to produce accurate noise pollution maps, we developed the SoundCompass, a low-cost sound sensor capable of measuring local noise levels and sound field directionality. Our first prototype is composed of a sensor array of 52 Microelectromechanical systems (MEMS) microphones, an inertial measuring unit and a low-power field-programmable gate array (FPGA). This article presents the SoundCompass’s hardware and firmware design together with a data fusion technique that exploits the sensing capabilities of the SoundCompass in a wireless sensor network to localize noise pollution sources. Live tests produced a sound source localization accuracy of a few centimeters in a 25-m2 anechoic chamber, while simulation results accurately located up to five broadband sound sources in a 10,000-m2 open field.

18 February 2014 in Sensors
Verified
Journal Article
Open access
PDF file
LSLaurent Segers
Laurent Segers
JTJelmer Tiete
Jelmer Tiete
ABAn Braeken
An Braeken
Abdellah TouhafiAbdellah Touhafi
Abdellah Touhafi
Indoor localization of persons and objects poses a great engineering challenge. Previously developed localization systems demonstrate the use of wideband techniques in ultrasound ranging systems. Direct sequence and frequency hopping spread spectrum ultrasound signals have been proven to achieve a high level of accuracy. A novel ranging method using the frequency hopping spread spectrum with finite impulse response filtering will be investigated and compared against the direct sequence spread spectrum. In the first setup, distances are estimated in a single-access environment, while in the second setup, two senders and one receiver are used. During the experiments, the micro-electromechanical systems are used as ultrasonic sensors, while the senders were implemented using field programmable gate arrays. Results show that in a single-access environment, the direct sequence spread spectrum method offers slightly better accuracy and precision performance compared to the frequency hopping spread spectrum. When two senders are used, measurements point out that the frequency hopping spread spectrum is more robust to near-far effects than the direct sequence spread spectrum.

30 July 2015 in Sensors
Verified
Journal Article
Open access
PDF file
LSLaurent Segers
Laurent Segers
DBDavid Van Bavegem
David Van Bavegem
SWSam De Winne
Sam De Winne
ABAn Braeken
An Braeken
Abdellah TouhafiAbdellah Touhafi
Abdellah Touhafi
KSKris Steenhaut
Kris Steenhaut
This paper describes a new approach and implementation methodology for indoor ranging based on the time difference of arrival using code division multiple access with ultrasound signals. A novel implementation based on a field programmable gate array using finite impulse response filters and an optimized correlation demodulator implementation for ultrasound orthogonal signals is developed. Orthogonal codes are modulated onto ultrasound signals using frequency shift keying with carrier frequencies of 24.5 kHz and 26 kHz. This implementation enhances the possibilities for real-time, embedded and low-power tracking of several simultaneous transmitters. Due to the high degree of parallelism offered by field programmable gate arrays, up to four transmitters can be tracked simultaneously. The implementation requires at most 30% of the available logic gates of a Spartan-6 XC6SLX45 device and is evaluated on accuracy and precision through several ranging topologies. In the first topology, the distance between one transmitter and one receiver is evaluated. Afterwards, ranging analyses are applied between two simultaneous transmitters and one receiver. Ultimately, the position of the receiver against four transmitters using trilateration is also demonstrated. Results show enhanced distance measurements with distances ranging from a few centimeters up to 17 m, while keeping a centimeter-level accuracy.

29 September 2016
Verified
Conference Paper
Closed access
Bruno da SilvaBruno da Silva
Bruno da Silva
LSLaurent Segers
Laurent Segers
ABAn Braeken
An Braeken
Abdellah TouhafiAbdellah Touhafi
Abdellah Touhafi
Sound-source localization is used in many different real-time acoustic applications. Microphone arrays have the potential capability to recognize, profile and locate sound-sources in noisy environments. The quality response of such sensor arrays, however, is determined by the quantity of microphones. A higher number of microphones increases the computational demand, making real-time response challenging. In this paper, we present a scalable and runtime reconfigurable architecture to provide accurate sound-source localization in real-time. On one hand, the reconfigurable architecture is designed to be scalable in order to support a variable number of microphones. On the other hand, we use runtime reconfigurable look-up tables (CFGLUTs) to provide a dynamic response in real-time. Experiments demonstrate how an accurate sound-source localization is obtained in less than a few hundred milliseconds. As far as we are aware, it is the first time that runtime reconfiguration is applied to a reconfigurable architecture consisting of a sensor array.

15 September 2019 in Journal of Sensors
Verified
Journal Article
Open access
PDF file
Bruno da SilvaBruno da Silva
Bruno da Silva
LSLaurent Segers
Laurent Segers
ABAn Braeken
An Braeken
KSKris Steenhaut
Kris Steenhaut
Abdellah TouhafiAbdellah Touhafi
Abdellah Touhafi
Many applications rely on MEMS microphone arrays for locating sound sources prior to their execution. Those applications not only are executed under real-time constraints but also are often embedded on low-power devices. These environments become challenging when increasing the number of microphones or requiring dynamic responses. Field-Programmable Gate Arrays (FPGAs) are usually chosen due to their flexibility and computational power. This work intends to guide the design of reconfigurable acoustic beamforming architectures, which are not only able to accurately determine the sound Direction-Of-Arrival (DoA) but also capable to satisfy the most demanding applications in terms of power efficiency. Design considerations of the required operations performing the sound location are discussed and analysed in order to facilitate the elaboration of reconfigurable acoustic beamforming architectures. Performance strategies are proposed and evaluated based on the characteristics of the presented architecture. This power-efficient architecture is compared to a different architecture prioritizing performance in order to reveal the unavoidable design trade-offs.

12 February 2025 in Future Internet
Verified
Journal Article
Open access
PDF file
BEBaciu Vlad Eusebiu
Baciu Vlad Eusebiu
ABAn Braeken
An Braeken
LSLaurent Segers
Laurent Segers
Bruno da SilvaBruno da Silva
Bruno da Silva
Emerging edge devices are transforming the Internet of Things (IoT) by enabling more responsive and efficient interactions between physical objects and digital networks. These devices support diverse applications, from health-monitoring wearables to environmental sensors, by moving data processing closer to the source. Traditional IoT systems rely heavily on centralized servers, but advances in edge computing and Tiny Machine Learning (TinyML) now allow for on-device processing, enhancing battery efficiency and reducing latency. While this shift improves privacy, the distributed nature of edge devices introduces new security challenges, particularly regarding TinyML models, which are designed for low-power environments and may be vulnerable to tampering or unauthorized access. Since other IoT entities depend on the data generated by these models, ensuring trust in the devices is essential. To address this, we propose a lightweight dual attestation mechanism utilizing Entity Attestation Tokens (EATs) to validate the device and ML model integrity. This approach enhances security by enabling verified device-to-device communication, supports seamless integration with secure cloud services, and allows for flexible, authorized ML model updates, meeting modern IoT systems’ scalability and compliance needs.