Previous studies on the water quality of surface runoff often focused on the chemical oxygen demand (COD), nitrogen, phosphorus, and total suspended solid (TSS), but little is known in terms of the inorganic suspended solids (ISS). This research investigated the effects of ISS carried by surface runoff on the treatment efficiency of the pretreatment facilities and the ratio of mixed liquor volatile suspended solid to mixed liquor suspended solid (MLVSS/MLSS) of the activated sludge in a wastewater treatment plant (WWTP) with the anaerobic-anoxic-oxic (AAO) process in Chongqing city, China. The results showed that the surface runoff had a long-lasting impact on the grit removal capacity of the grit chamber, affecting the normal operation after the rainfall. In contrast, the primary sedimentation tank showed strong impact resistance with higher removal rates of COD, TSS, and ISS. Nonetheless, the primary settling tank aggravates the removal of organic carbon in sewage during rainfall, having a negative impact on subsequent biological treatment. The ISS in the surface runoff could increase the sludge concentration and decrease the MLVSS/MLSS ratio. After repeated surface runoff impact, the MLVSS/MLSS ratio in the activated sludge would drop below even 0.3, interrupting the normal operation of WWTP.
This paper studies the accumulation mechanism of different types of inorganic solids in activated sludge system by taking two main kinds of inorganic solids-chemical sludge and sediment as the research object. In the chemical phosphorus removal experiment, self-made calcium silicate hydrate was used as the chemical phosphorus removal agent and added to the end of the biochemical system of domestic sewage for phosphorus removal experiment, while the fine sediment was simulated by quartz sand of 26, 73, 106, 165 and 210 mu m respectively, and a complete mixture model of inorganic solid accumulation was established as X-iss = C-iss,C- (inf) x (SRT/HRT + 1) x (1-e(-t)/SRT). The results showed that the self-made hydrated calcium silicate had good phosphorus removal effect, and the TP of domestic sewage could be removed from 7 mg/L to 0.5 mg/L. The chemical sludge accumulation in the phosphorus removal process conforms to the complete mixing model, and the relative errors of measured and predicted values of MLVSS/MLSS and MLISS were 1% and 3%, respectively. The sediment accumulation process does not conform to the completely mixed model. The relative error of MLVSS/MLSS is between 56% and 77%, and that of MLISS is between -45% and -80%. The accumulation forms of inorganic solids in different forms of activated sludge systems are also different. Chemical sludge is mainly suspended in the mixture, reducing the proportion of MLVSS/MLSS. In activated sludge system, sediment is accumulated in various forms such as suspension and deposition.
Chemical phosphorus removal agent is generally added at the end of aeration in sewage treatment plants to ensure the total amount of phosphorus discharged from water reaches the standard. However, chemical sludge generated in the process of phosphorus removal enters the biochemical treatment system along with the backflow sludge and gradually accumulates. In this paper, ferric sulfate and aluminum sulfate, commonly used as phosphorus removal agents, were selected to add 1.5∼3 mol metal ions/mol P at the aeration end. The effects of chemical phosphorus removal on the accumulation of inorganic solid, sludge properties and water quality of activated sludge were studied. The effects of fine sediment and chemical phosphorus removal on the accumulation of inorganic solid in activated sludge were compared and analyzed.
Nano-sized zinc ferrite (ZnFe2O4) particles were synthesized via a coprecipitation method, and their photocatalytic performance for the degradation of oxytetracycline (OTC) solution was investigated, both alone and in a ZnFe2O4 photocatalysis/PDS synergistic system. XRD, SEM, and TEM analyses revealed that the as-prepared product consists of well-dispersed, high-purity spinel-type zinc ferrite nanoparticles. XPS spectra showed characteristic peaks corresponding to Zn, Fe, and O. Comparative studies indicated that the ZnFe2O4 nanoparticles alone exhibited weak photocatalytic activity toward OTC degradation, whereas the ZnFe2O4 photocatalysis/PDS synergistic system significantly enhanced the degradation efficiency. Electron paramagnetic resonance (EPR) and radical quenching experiments demonstrated that both radical and non-radical pathways play important roles in the removal of OTC. Under visible light irradiation, ZnFe2O4 generates photogenerated holes, which promote the activation of persulfate, leading to the formation of •SO4−, •OH, and •O2− radicals. Simultaneously, the system facilitates the decomposition of PDS to produce singlet oxygen (1O2). Both pathways collectively contribute to the enhanced degradation of OTC. The optimal initial pH was determined to be 3. Under optimized conditions—100 mL of 50 mg/L OTC solution, 0.5 g/L ZnFe2O4 catalyst, 2 mM PDS, and 90 min of visible light photocatalysis—the degradation efficiency reached 95.15%.