Wha-Jung Kim

Prof. Wha-Jung Kim

orcid

Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 September 2020 in Nanomaterials
Verified
Journal Article
Open access
PDF file
Anantha-Iyengar GopalanAnantha-Iyengar Gopalan
Anantha-Iyengar Gopalan
JLJun-Cheol Lee
Jun-Cheol Lee
Saianand GopalanSaianand Gopalan
Saianand Gopalan
Kwang Pill LeeKwang Pill Lee
Kwang Pill Lee
Prashant SonarPrashant Sonar
Prashant Sonar
WKWha-Jung Kim
Wha-Jung Kim
Titanium dioxide (TiO2) has been extensively investigated in interdisciplinary research (such as catalysis, energy, environment, health, etc.) owing to its attractive physico-chemical properties, abundant nature, chemical/environmental stability, low-cost manufacturing, low toxicity, etc. Over time, TiO2-incorporated building/construction materials have been utilized for mitigating potential problems related to the environment and human health issues. However, there are challenges with regards to photocatalytic efficiency improvements, lab to industrial scaling up, and commercial product production. Several innovative approaches/strategies have been evolved towards TiO2 modification with the focus of improving its photocatalytic efficiency. Taking these aspects into consideration, research has focused on the utilization of many of these advanced TiO2 materials towards the development of construction materials such as concrete, mortar, pavements, paints, etc. This topical review focuses explicitly on capturing and highlighting research advancements in the last five years (mainly) (2014–2019) on the utilization of various modified TiO2 materials for the development of practical photocatalytic building materials (PBM). We briefly summarize the prospective applications of TiO2-based building materials (cement, mortar, concretes, paints, coating, etc.) with relevance to the removal of outdoor/indoor NOx and volatile organic compounds, self-cleaning of the surfaces, etc. As a concluding remark, we outline the challenges and make recommendations for the future outlook of further investigations and developments in this prosperous area.

9 February 2021 in Nanomaterials
Verified
Journal Article
Open access
PDF file
RMRASHMI M
RASHMI M
VKVaithinathan Karthikeyan
Vaithinathan Karthikeyan
Nandakumar VNandakumar V
Nandakumar V
CAChandravadhana A
Chandravadhana A
VRV.A.L. Roy
V.A.L. Roy
venkatramanan kannanvenkatramanan kannan
venkatramanan kannan
Magnetic nanoparticles (MNPs) are widely used materials for biomedical applications owing to their intriguing chemical, biological and magnetic properties. The evolution of MNP based biomedical applications (such as hyperthermia treatment and drug delivery) could be advanced using magnetic nanofluids (MNFs) designed with a biocompatible surface coating strategy. This study presents the first report on the drug loading/release capability of MNF formulated with methoxy polyethylene glycol (referred to as PEG) coated MNP in aqueous (phosphate buffer) fluid. We have selected MNPs (NiFe2O4, CoFe2O4 and Fe3O4) coated with PEG for MNF formulation and evaluated the loading/release efficacy of doxorubicin (DOX), an anticancer drug. We have presented in detail the drug loading capacity and the time-dependent cumulative drug release of DOX from PEG-coated MNPs based MNFs. Specifically, we have selected three different MNPs (NiFe2O4, CoFe2O4 and Fe3O4) coated with PEG for the MNFs and compared their variance in the loading/release efficacy of DOX, through experimental results fitting into mathematical models. DOX loading takes the order in the MNFs as CoFe2O4 > NiFe2O4 > Fe3O4. Various drug release models were suggested and evaluated for the individual MNP based NFs. While the non-Fickian diffusion (anomalous) model fits for DOX release from PEG coated CoFe2O4, PEG coated NiFe2O4 NF follows zero-order kinetics with a slow drug release rate of 1.33% of DOX per minute. On the other hand, PEG coated NiFe2O4 follows zero-order DOX release. Besides, several thermophysical properties and magnetic susceptibility of the MNFs of different concentrations have been studied by dispersing the MNPs (NiFe2O4, CoFe2O4 and Fe3O4) in the base fluid at 300 K under ultrasonication. This report on the DOX loading/release capability of MNF will set a new paradigm in view that MNF can resolve problems related to the self-heating of drug carriers during mild laser treatment with its thermal conducting properties.

11 February 2019 in Catalysts
Verified
Journal Article
Open access
PDF file
JLJun-Cheol Lee
Jun-Cheol Lee
Anantha-Iyengar GopalanAnantha-Iyengar Gopalan
Anantha-Iyengar Gopalan
Saianand GopalanSaianand Gopalan
Saianand Gopalan
Kwang Pill LeeKwang Pill Lee
Kwang Pill Lee
WKWha-Jung Kim
Wha-Jung Kim
The quest for developing highly efficient TiO2-based photocatalysts is continuing and, in particular, evolving a new strategy is an important aspect in this regard. In general, much effort has been devoted to the anatase TiO2 modifications, despite there being only a few recent studies on rutile TiO2 (rTiO2). To the best of our knowledge, studies on the preparation and characterization of the photocatalysts based on the intentional inclusion of graphene (G) into rTiO2 nanostructures have not been reported yet. Herein, we develop a new type of TiO2-based photocatalyst comprising of G included pure rTiO2 nanowire (abbreviated as rTiO2(G) NW) with enhanced visible light absorption capability. To prepare rTiO2(G) NW, the G incorporated titanate electrospun fibers were obtained by electrospinning and subsequently heat treated at various temperatures (500 to 800 °C). Electrospinning conditions were optimized for producing good quality rTiO2(G) NW. The rTiO2(G) NW and their corresponding samples were characterized by appropriate techniques such as X-ray diffraction (XRD), scanning electron microscopy, high-resolution transmission electron microscopy and UV-vis diffuse reflectance spectroscopy to ascertain their material characteristics. XRD results show that the lattice strain occurs upon inclusion of G. We present here the first observation of an apparent bandgap lowering because of the G inclusion into TiO2 NW. While anatase TiO2 NW exhibited poor visible light photocatalysis towards NOx removal, the rTiO2(G) NW photocatalyst witnessed a significantly enhanced (~67%) photocatalytic performance as compared to anatase TiO2(G) NW. We concluded that the inclusion of G into rTiO2 nanostructures enhances the visible light photoactivity. A plausible mechanism for photocatalysis is suggested.

4 March 2020 in Nanomaterials
Verified
Journal Article
Open access
PDF file
JLJun-Cheol Lee
Jun-Cheol Lee
Anantha-Iyengar GopalanAnantha-Iyengar Gopalan
Anantha-Iyengar Gopalan
Saianand GopalanSaianand Gopalan
Saianand Gopalan
Kwang Pill LeeKwang Pill Lee
Kwang Pill Lee
WKWha-Jung Kim
Wha-Jung Kim
We report the detailed microstructural, morphological, optical and photocatalytic studies of graphene (G) and manganese (Mn) co-doped titanium dioxide nanowires (TiO2(G–Mn) NWs) prepared through facile combined electrospinning–hydrothermal processes. The as-prepared samples were thoroughly characterized using X-ray diffraction (XRD), transmission electron microscopy, X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and diffuse reflectance spectroscopy (DRS). XRD studies reveal the formation of mixed anatase-rutile phases or rutile phase depending on the dopant (Mn) precursor concentrations in the electrospinning dope and calcination temperature. The evaluation of lattice parameters revealed that the incorporation of Mn species and carbon atoms in to the lattice of anatase or rutile TiO2 could occur through substituting the sites of oxygen atoms. XPS results confirm the existence of Mn2+/Mn3+ within the TiO2 NW. Raman spectroscopy provides the evidence for structural modification because of the graphene inclusion in TiO2 NW. The optical band gap of G–Mn including TiO2 is much lower than pristine TiO2 as confirmed through UV-vis DRS. The photocatalytic activities were evaluated by nitric oxide (NOx) degradation tests under visible light irradiation. Superior catalytic activity was witnessed for rutile G–Mn-co-doped TiO2 NW over their anatase counterparts. The enhanced photocatalytic property was discussed based on the synergistic effects of doped G and Mn atoms and explained by plausible mechanisms.

6 January 2024 in Nanomaterials
Verified
Journal Article
Open access
PDF file
MKMADHAN KUPPUSAMY
MADHAN KUPPUSAMY
SKSun Woo Kim
Sun Woo Kim
Kwang Pill LeeKwang Pill Lee
Kwang Pill Lee
YJYoung Jin Jo
Young Jin Jo
WKWha-Jung Kim
Wha-Jung Kim
This study explores the depollution activity of a photocatalytic cementitious composite comprising various compositions of n-TiO2 and CaCO3. The photocatalytic activity of the CaCO3–TiO2 composite material is assessed for the aqueous photodegradation efficiency of MB dye solution and NOx under UV light exposure. The catalyst CaCO3–TiO2 exhibits the importance of an optimal balance between CaCO3 and n-TiO2 for the highest NOx removal of 60% and MB dye removal of 74.6%. The observed trends in the photodegradation of NOx removal efficiencies suggest a complex interplay between CaCO3 and TiO2 content in the CaCO3–n-TiO2 composite catalysts. This pollutant removal efficiency is attributed to the synergistic effect between CaCO3 and n-TiO2, where a higher percentage of n-TiO2 appeared to enhance the photocatalytic activity. It is recommended that CaCO3–TiO2 photocatalysts are effectiveness in water and air purification, as well as for being cost-effective construction materials.

12 February 2025 in Materials
Verified
Journal Article
Open access
PDF file
JLJun-Cheol Lee
Jun-Cheol Lee
MHMan-Woo Huh
Man-Woo Huh
HYHOU YAOLONG
HOU YAOLONG
WKWha-Jung Kim
Wha-Jung Kim
This study provides a systematic review of photocatalytic fiber coating technology as a potential solution to challenges in the textile industry. An analysis of recent research (2020–2024) reveals significant developments in materials and methods. Traditional photocatalysts (TiO2 and ZnO) are being enhanced through doping and nanostructure control, and novel materials such as graphene-based composites and metal-organic frameworks are emerging. Advanced coating technologies, such as plasma treatment, atomic layer deposition, and magnetron sputtering, have been introduced to improve coating uniformity and durability. Key trends include the development of multifunctional coatings that combine self-cleaning, antibacterial effects, ultraviolet (UV) protection, and superhydrophobic properties. Environmental sustainability is advancing through eco-friendly manufacturing processes, although concerns regarding nanoparticle safety persist. While applications are expanding into medical textiles, protective gear, and wastewater treatment, challenges remain in terms of mass production technology, cost-effectiveness, and long-term durability. Future research should focus on nanostructure control, the development of visible-light-active materials, the optimization of coating processes, and the investigation of environmental impacts. This review suggests that photocatalytic fiber coating technology can significantly contribute to sustainable textile industry development when these challenges are effectively addressed.