Floating photovoltaics (FPVs) are appearing as a promising and an alternative renewable energy opinion in which PV panels are mounted on floating platforms in order to produce electricity from renewable energy on water such as seas, dams, rivers, oceans, canals, fish farms, and reservoirs. So far, such studies related to the body knowledge on financial, technical, and environmental aspects of installation of FPV have not been performed in Turkey while expanding steadily in other countries. In this study, suitable site selection for installation of FPV power plants on three lakes in Turkey was studied by performing geographic information system (GIS) and the fuzzy analytic hierarchy process (FAHP) as multi-criteria decision-making (MCDM) method. This detailed study revealed that the criterion of global horizontal irradiance (GHI) was determined as the most crucial criterion for the installation of FPV on Beysehir Lake, Lake of Tuz, and Van Lake. Additionally, it was clearly seen that the Beysehir Lake had the highest value approximately 52% among other lakes for installation, that is why Beysehir Lake is selected as the best option for installation of an FPV system with this multi-criteria approach.
The current study is aimed at investigating the influences of vortex generator (VG) applications mounted to the suction and pressure surfaces of the S809 wind turbine airfoil at low Reynolds number flow conditions. Both single and double VG applications were investigated to provide technological advancement in wind turbine blades by optimizing their exact positions on the surface of the airfoil. The results of the smoke-wire experiment for the uncontrolled case reveal that a laminar separation bubble formed near the trailing edge of the suction surface, and it was moved towards the leading edge as expected when the angle of attack was increased, resulting in bubble burst and leading-edge flow separation at α = 12°. The u/U∞, laminar kinetic energy and total fluctuation energy contours obtained from the numerical study clearly show that both the single and double VG applications produced small eddies, and those eddies in the double VG case led the flow to be reattached at the trailing edge of the suction surface and to gain more momentum by energizing. This situation was clearly supported by the results of aerodynamic force; the double VG application caused the lift coefficient to increase, resulting in an enhancement of the aerodynamic performance. A novel finding is that the VG at the pressure surface caused the flow at the wake region to gain more energy and momentum, resulting in a reattached and steadier flow condition.
This research provides a comprehensive review of hybrid energy solutions and optimization models for ports and marine environments. It details new methodologies, including strategic energy management and a machine learning (ML) tool for predicting energy surplus and deficits. The hybrid energy module solution for the Port of Avilés was further developed to evaluate the performance of new tools such as the Energy Management Tool (EMTv1), HYbrid for Renewable Energy Solutions (HY4RES), and a commercial model (Hybrid Optimization of Multiple Energy Resources—HOMER) in optimizing renewable energy and storage management. Seven scenarios were analyzed, integrating different energy sources and storage solutions. Using EMTv1, Scenario 1 showed high surplus energy, while Scenario 2 demonstrated grid independence with Pump-as-Turbine (PAT) storage. The HY4RES model was used to analyze Scenario 3, which achieved a positive grid balance, exporting more than imported, and Scenario 4 revealed limitations of the PAT system due to the low power installed. Scenario 5 introduced a 15 kWh battery, efficiently storing and discharging energy, reducing grid reliance, and fully covering energy needs. Using HOMER modeling, Scenario 6 required 546 kWh of grid energy but sold 2385 kWh back. Scenario 7 produced 3450 kWh/year, covering demand, resulting in 1834 kWh of surplus energy and a small capacity shortage (1.41 kWh/year). AI-based ML analysis was applied to five scenarios (the ones with access to numerical results), accurately predicting energy balances and optimizing grid interactions. A neural network time series (NNTS) model trained on average year data achieved high accuracy (R2: 0.9253–0.9695). The ANN model proved effective in making rapid energy balance predictions, reducing the need for complex simulations. A second case analyzed an increase of 80% in demand, confirming the model’s reliability, with Scenario 3 having the highest MSE (0.0166 kWh), Scenario 2 the lowest R2 (0.9289), and Scenario 5 the highest R2 (0.9693) during the validation process. This study highlights AI-driven forecasting as a valuable tool for ports to optimize energy management, minimize grid dependency, and enhance their efficiency.