The paper analyzes losses and the loss generation mechanisms in a low-pressure turbine (LPT) cascade by proper orthogonal decomposition (POD) applied to measurements. Total pressure probes and time-resolved particle image velocimetry (TR-PIV) are used to determine the flow field and performance of the blade with steady and unsteady inflow conditions varying the flow incidence. The total pressure loss coefficient is computed by traversing two Kiel probes upstream and downstream of the cascade simultaneously. This procedure allows a very accurate estimation of the total pressure loss coefficient also in the potential flow region affected by incoming wake migration. The TR-PIV investigation concentrates on the aft portion of the suction side boundary layer downstream of peak suction. In this adverse pressure gradient region, the interaction between the wake and the boundary layer is the strongest, and it leads to the largest deviation from a steady loss mechanism. POD applied to this portion of the domain provides a statistical representation of the flow oscillations by splitting the effects induced by the different dynamics. The paper also describes how POD can dissect the loss generation mechanisms by separating the contributions to the Reynolds stress tensor from the different modes. The steady condition loss generation, driven by boundary layer streaks and separation, is augmented in the presence of incoming wakes by the wake–boundary layer interaction and by the wake dilation mechanism. Wake migration losses have been found to be almost insensitive to incidence variation between nominal and negative (up to −9 deg) while at positive incidence, the losses have a steep increase due to the alteration of the wake path induced by the different loading distribution.

The off-design performance of a highly loaded low pressure (LP) turbine cascade has been experimentally investigated, at the Aerodynamics and Turbomachinery Laboratory of Genova University, under steady and unsteady incoming flow conditions. Tests have been performed for different Reynolds numbers (Re = 70,000 and Re = 300,000), in order to cover the typical LP turbine working range. The incidence angle has been varied between i = −9 deg and +9 deg, in order to test off-design conditions characterizing the engine. For the unsteady case, upstream wake periodic perturbations have been generated by means of a tangential wheel of radial rods. The cascade and the moving bars system have been located over a common bearing in order to make them rigidly rotating. This solution allows a proper comparison of the cascade robustness at the incidence angle variation under steady and unsteady incoming flows, since all the other operating parameters have been kept the same. In order to survey the variation of the unsteady boundary conditions characterizing the off-design operation of the downstream cascade, time-mean and time-resolved wake structures have been analyzed in detail. For what concerns the cascade performance, profile aerodynamic loadings and total pressure loss coefficients at the cascade exit have been surveyed for the different incidence angles under both steady and unsteady inflows. Different total pressure loss sensitivity at the incidence angle variation has been observed for the steady and the unsteady inflow conditions. Hot-wire anemometer has been employed to obtain the time-mean pressure and suction side boundary layer velocity profiles at the blade trailing edge for the different conditions. The integral parameters at the cascade exit plane help to justify the different loss trend versus incidence angle found for the steady and the unsteady cases, explaining the different sensibility of the blade profile when this operates under realistic unsteady inflow condition.

A semi-empirical model for the estimation of the Kelvin–Helmholtz (KH) instability frequency, in the case of short laminar separation bubbles over airfoils, has been developed. To this end, the Thwaites's pressure gradient parameter has been adopted to account for the effects induced by the aerodynamic loading distribution as well as by the Reynolds number on the separated shear layer thickness at separation. The most amplified frequency predicted by linear stability theory (LST) for a piecewise linear profile, which can be considered as the KH instability frequency, has been related to the shear layer thickness at separation, hence to the Reynolds number and the aerodynamic loading distribution through the Thwaites's pressure gradient parameter. This procedure allows the formulation of a functional dependency between the Strouhal number of the shedding frequency based on exit conditions and the dimensionless parameters. Experimental results obtained in different test cases, characterized by different Reynolds numbers and aerodynamic loading distributions, have been used to validate the model, as well as to identify the regression curve best fitting the data. The semi-empirical correlation here derived can be useful to set the activation frequency of active flow control devices for the optimization of boundary layer separation control strategies.

Nowadays, several technologies for desalination processes are available and widely employed. However, they consume a considerable amount of energy and involve high capital and operating costs. Therefore, the techno-economic analysis of a system coupling different energy sources with the desalination processes is of value. The possibility of coupling a small gas turbine combined heat and power system (GT CHP) with hybrid desalination plants (HDPs) has been assessed in this study. The proposed gas turbine power generation system, based on a single-stage centrifugal compressor and an uncooled centripetal turbine, provides design simplicity and reasonable installation costs for the power generating plant. The hybrid desalination technique, based on the use of two different desalination technologies, i.e., Reverse Osmosis (RO) and a thermal desalination process, has been chosen to better exploit the electrical and thermal energy produced by the mini CHP plant. The proposed solution is numerically investigated from both thermodynamic and economic points of view, and the results of the thermodynamic analysis of the cycle are used as input for the evaluation of the amount of freshwater produced and of costs. The economic assessment of standalone desalination systems is also shown for the comparison with the hybrid solutions here proposed. Results show that the total cost of the water produced by MED + RO was less than the total cost of the water obtained by MSF + RO, and that the energy cost of MED + RO hybrid desalination system was about 15% less than that for stand-alone RO desalination technology. Thus, the MED + RO hybrid desalination system can be considered a promising solution for the coupling with the proposed mini GT CHP plant, which, due to the small size and cost, as well as the easy installation, can be easily applied in off-grid or remote areas.