In this paper, we present an experimental investigation on the energy harvesting performance of dynamically tailored structures based on the concept of embedded acoustic black holes (ABHs). Embedded ABHs allow tailoring the wave propagation characteristics of the host structure creating structural areas with extreme levels of energy density. Experiments are conducted on a tapered plate-like aluminum structure with multiple embedded ABH features. The dynamic response of the structure is tested via laser vibrometry in order to confirm the vibration localization and the passive wavelength sweep characteristic of ABH embedded tapers. Vibrational energy is extracted from the host structure and converted into electrical energy by using ceramic piezoelectric discs bonded on the ABHs and shunted on an external electric circuit. The energy harvesting performance is investigated both under steady state and transient excitation. The experimental results confirm that the dynamic tailoring produces a drastic increase in the harvested energy independently from the nature of the excitation input.
Acoustic rainbow trappers, based on frequency selective structures with graded geometries and/or properties, can filter mechanical waves spectrally and spatially to reduce noise and interference in receivers. These structures are especially useful as passive, always-on sensors in applications such as structural health monitoring. For devices that face space and weight constraints, such as microelectromechanical systems (MEMS) transducers and artificial cochleae, the rainbow trapping structures must be compact as well. To address this requirement, we investigated the frequency selection properties of a space-saving design consisting of Helmholtz resonators arranged at sub-wavelength intervals along a cochlear-inspired spiral tube. The height of the Helmholtz resonators was varied gradually, which induced bandgap formation at different frequencies along the length of the spiral tube. Numerical simulations and experimental measurements of acoustic wave propagation through the structure showed that frequencies in the range of 1–10 kHz were transmitted to different extents along the spiral tube. These rainbow trapping results were achieved with a footprint that was up to 70 times smaller than the previous structures operating at similar bandwidths, and the channels are 2.5 times of the previous structures operating at similar bandwidths.
1 October 2020 in Mechanical Systems and Signal Processing
We report ultrasound beam steering based on 2D and 3D flattened acoustic metamaterial Luneburg lenses at 40 kHz. The effective properties of the lenses are obtained by using the quasi-conformal transformation technique and solving the Laplace equation with Dirichlet and Neumann boundary conditions. A 2D lens and a 3D lens were designed and fabricated. The numerical and experimental results with these lenses demonstrate excellent beam steering performance of ultrasonic waves in both near field and far field.