The high-end equipment represented by high-end machine tools and aero-engines is the core component of the national intelligent manufacturing plan, and the mass unbalance is the main reason for its excessive vibration, that seriously impacts the operation efficiency and running life of the equipment. In order to change the traditional way that the fault of equipment can only be repaired by human, the self-recovery mechanism of human and animal are given to the equipment in this paper, which forms the self-recovery regulation (SR) system for unbalance vibration of high-end equipment. The system can online generate the self-recovery force to restrain the unbalance vibration of the equipment in operation, which is an important direction for the development of the equipment to the advanced intelligent stage. Based on the basic principles of SR technique, the typical engineering application cases of this technique in the field of aeroengine and high-end machine tools are introduced, and four related studies promoting the development of this technique are summarized and analyzed in turn. It includes feature extraction, imbalance location, regulation method and balancing actuator. Self-recovery Regulation (SR) Technique is an important way to realize intelligent manufacturing and intelligent maintenance. Relevant research can lay a technical foundation for the development of high-end equipment with self-health function.
10 May 2024 in Chinese Journal of Mechanical Engineering
The co-frequency vibration fault is one of the common faults in the operation of rotating equipment, and realizing the real-time diagnosis of the co-frequency vibration fault is of great significance for monitoring the health state and carrying out vibration suppression of the equipment. In engineering scenarios, co-frequency vibration faults are highlighted by rotational frequency and are difficult to identify, and existing intelligent methods require more hardware conditions and are exclusively time-consuming. Therefore, Lightweight-convolutional neural networks (LW-CNN) algorithm is proposed in this paper to achieve real-time fault diagnosis. The critical parameters are discussed and verified by simulated and experimental signals for the sliding window data augmentation method. Based on LW-CNN and data augmentation, the real-time intelligent diagnosis of co-frequency is realized. Moreover, a real-time detection method of fault diagnosis algorithm is proposed for data acquisition to fault diagnosis. It is verified by experiments that the LW-CNN and sliding window methods are used with high accuracy and real-time performance.
15 July 2024 in Chinese Journal of Mechanical Engineering
Intelligent fault diagnosis is an important method in rotating machinery fault diagnosis and equipment health management. To deal with co-frequency vibration faults, a type of typical fault in rotating machinery, this paper proposes a fault diagnosis method based on the stacked autoencoder (SAE) and ensembled ResNet-SVM. Furthermore, the time- and frequency-domain features of several co-frequency vibration faults are summarized based on the mechanism analysis and calculated using actual vibration data. To realize and validate the high-precision diagnosis method of rotating equipment with co-frequency faults proposed in this study, the following three criteria are required: First, to improve the effectiveness and robustness of the ensembled model and the sliding window using data augmentation, adding noise, autoencoder (AE) and SAE methods are analyzed in terms of principle and practical effects. Second, ResNet is used as the feature extractor for the ensembled ResNet-SVM model. Feature extraction is carried out twice, and the extracted co-frequency fault features are more comprehensive. Finally, the data augmentation method and ensemble ResNet-SVM are combined for fault diagnosis and compared with other methods. The experimental results show that the accuracy of the proposed method can exceed 99.9%.
With the development of high-speed rotating machinery, the unbalance vibration feature of each rotor system has a greater influence on the work efficiency, bearing life, operational time, etc. Therefore, an active balancing system is necessary to automatically reduce the unbalance vibration in the process of rotor operation. This study introduced a novel liquid transfer active balancing system for the hollow rotors, and compensation mass was performed by balance liquid transmission between two pairs of contra-positioned chambers. The performance of this new balance actuator was analyzed, including balancing velocity, balancing accuracy, and the effect on rotor dynamics. A monitoring and control program was constructed to control the balance actuator. Two extraction methods of synchronic vibration were introduced and quantitatively compared through simulation. A control program was developed and the control accuracy was within 1 ms. Furthermore, the effectiveness of the new balancing system was verified through active balance experiments and the maximum speed was 15,600 rpm. The results indicate that the balancing system could effectively decrease the unbalance vibration of the rotor system within 10 s, and the amount of decrease was more than 80%.
7 January 2021 in Chinese Journal of Mechanical Engineering
Imbalance vibration is a typical failure mode of rotational machines and has significant negative effects on the efficiency, accuracy, and service life of equipment. To automatically reduce the imbalance vibration during the operational process, different types of active balancing actuators have been designed and widely applied in actual production. However, the existing electromagnetic-ring active balancing actuator is designed based on an axial excitation structure which can cause structural instability and has low electromagnetic driving efficiency. In this paper, a novel radial excitation structure and the working principle of an electromagnetic-ring active balancing actuator with a combined driving strategy are presented in detail. Then, based on a finite element model, the performance parameters of the actuator are analyzed, and reasonable design parameters are obtained. Self-locking torque measurements and comparative static and dynamic experiments are performed to validate the self-locking torque and driving efficiency of the actuator. The results indicate that this novel active balancing actuator has sufficient self-locking torque, achieves normal step rotation at 2000 r/min, and reduces the driving voltage by 12.5%. The proposed novel balancing actuator using radial excitation and a combination of permanent magnets and soft-iron blocks has improved electromagnetic efficiency and a more stable and compact structure.
8 April 2024 in IEEE Transactions on Instrumentation and Measurement
The quantitative diagnosis of rolling bearing defects still mainly relies on the manual analysis of vibration signals and is limited to a specific moment in time, which restricts the intelligent identification of life-cycle defect evolution. In this article, a novel digital twin-driven graph convolutional memory network (GCMN) is proposed for evaluating the defect evolution of rolling bearings throughout the whole life. In the proposed method, a dynamic twin model is constructed to generate the vibration responses that characterize the state of bearings. The twin model is capable of accurately simulating the operational conditions of the bearing and interacting with the actual responses, thereby enhancing the accuracy of the model. In addition, a graph network model GCMN is developed to transfer knowledge from the twin model to the physical entity through domain adaptation, thereby revealing the relationship between vibration responses and defect sizes. It extracts spatial features through nonlinear transformation of graph data and incorporates temporal features via the hidden layer state at the previous moment. The experimental results demonstrate that the proposed method accurately characterizes the local defect extension throughout the bearing entire lifespan.