Seyed-Habib Musavi-Jahromi

Prof. Seyed-Habib Musavi-Jahromi

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications

24 March 2021 in Water
Verified
Journal Article
Open access
PDF file
NMNargess Moghaddassi
Nargess Moghaddassi
SMSeyed-Habib Musavi-Jahromi
Seyed-Habib Musavi-Jahromi
MVMohammad Vaghefi
Mohammad Vaghefi
AKAmir Khosrojerdi
Amir Khosrojerdi
As 180-degree meanders are observed in abundance in nature, a meandering channel with two consecutive 180-degree bends was designed and constructed to investigate bed topography variations. These two 180-degree mild bends are located between two upstream and downstream straight paths. In this study, different mean velocity-to-critical velocity ratios have been tested at the upstream straight path to determine the meander’s incipient motion. To this end, bed topography variations along the meander and the downstream straight path were addressed for different mean velocity-to-critical velocity ratios. In addition, the upstream bend’s effect on the downstream bend was investigated. Results indicated that the maximum scour depth at the downstream bend increased as a result of changing the mean velocity-to-critical velocity ratio from 0.8 to 0.84, 0.86, 0.89, 0.92, 0.95, and 0.98 by, respectively, 1.5, 2.5, 5, 10, 12, and 26 times. Moreover, increasing the ratio increased the maximum sedimentary height by 3, 10, 23, 48, 49, and 56 times. The upstream bend’s incipient motion was observed for the mean velocity-to-critical velocity ratio of 0.89, while the downstream bend’s incipient motion occurred for the ratio of 0.78.

15 June 2024 in Journal of Water and Climate Change
Verified
Journal Article
Open access
PDF file
MNMohammad Sadeghi Nasirabadi
Mohammad Sadeghi Nasirabadi
AKAmir Khosrojerdi
Amir Khosrojerdi
SMSeyed-Habib Musavi-Jahromi
Seyed-Habib Musavi-Jahromi
MTMahdi Sarai Tabrizi
Mahdi Sarai Tabrizi
This study has used Coupled Model Intercomparison Project Phase 5 (CMIP5) and Coupled Model Intercomparison Project Phase 6 (CMIP6). Hence, the runoff simulation was done in near-future period (2030–2050) scenarios by applying climate change conditions for HadGEM2-ES model under three representative concentration pathways RCP2.6, 4.5 and 8.5 scenarios and for HadGEM3-GC31-LL model under SSP1-2.6, SSP2-4.5 and SSP5-8.5 scenarios. Examining the climatic precipitation variables and minimum and maximum temperature under climate change conditions showed a temperature increase of 1.51–2.91 °C for all models and scenarios and a precipitation decrease of 0.05–11.15% for most of them, and the SWAT model simulation showed a runoff decrease in all four stations under SSP scenarios and a runoff increase in three stations under RCP scenarios. Since the climate data for SSP scenarios have become available only recently, results of this study predict that the overall future flow will vary in the −5 to 28% range, resulting in a 5–35% decrease in the flow and, hence, a decrease in the inflow to the dam reservoir. Based on the results, there is a possibility of a 5–30% reduction of the runoff entering the dam reservoir.

14 April 2022 in Arabian Journal of Geosciences
Verified
Journal Article
Closed access
PDF file
MJMaryam Jamal
Maryam Jamal
HEHossein Ebrahimi
Hossein Ebrahimi
SMSeyed-Habib Musavi-Jahromi
Seyed-Habib Musavi-Jahromi


4 October 2022 in International Journal of Technology
Verified
Journal Article
Closed access
VRVafa Rezaei
Vafa Rezaei
SMSeyed-Habib Musavi-Jahromi
Seyed-Habib Musavi-Jahromi
AKAmir Khosrowjerdi
Amir Khosrowjerdi
BBBabak Beheshti
Babak Beheshti
The piano key weir (PKW) is a developed type of labyrinth spillway with the ability to transfer large amounts of discharge by keeping executive costs constant. In this study, the parameters affecting the discharge coefficient of nine models were evaluated using physical models and simulations by Flow-3D software. The PKW models included: PK1.0, PK1.1, PK1.2, PK1.3, PK1.4, PK1.5, and PK1.6 representing the width ratios of the inlet (Wi) to outlet (Wo) keys of 1.0, 1.1, 1.2, 1.3, 1.4, 1.5 and 1.6 respectively and the other two models were PKT (PK1.1 with a thicker wall) and PKTP (PK1.1 with a thicker wall and an enhanced crown). According to the results of experimental and simulation evaluations, the model of PK1.4 was selected as the optimal model, which increased the discharge rate by 30% compared to the control weir. Moreover, increasing wall thickness (PKT model) led to an increase in the discharge and installing a parapet wall (PKTP model) resulted in an increase in discharge and a uniform distribution of flow lines on the weir. Considering the superiority of models PK1.4, PKT, and PKTP, the geometric properties of these models can be used to optimize the design of PKWs.