Mesoporous metal oxides consisting of fully interconnected network structures with small pores (20–50 nm) have high surface areas and decreased ion intercalation distances, making them ideal for use in high-performance electrochromic supercapacitors (ECSs). Evaporation-induced self-assembly (EISA), which combines sol–gel chemistry and molecular self-assembly, is a powerful method for the fabrication of mesoporous metal oxides through a solution phase synthesis. Herein, we introduce ultrafast sub-1 s ECSs based on an amorphous mesoporous tungsten trioxide (WO₃) that is prepared by EISA. Compared to that of a compact-WO₃ film-based device, the performances of an ECS with mesoporous WO₃ exhibits a large optical modulation (76% at 700 nm), ultrafast switching speeds (0.8 s for coloration and 0.4 s for bleaching), and a high areal capacitance (2.57 mF/cm²), even at a high current density (1.0 mA/cm²). In addition, the excellent device stability during the coloration/bleaching and charging/discharging cycles is observed under fast response conditions. Moreover, we fabricated a patterned mesoporous WO₃ for ECS displays (ECSDs) via printing-assisted EISA (PEISA). The resulting ECSDs can be used as portable energy-storage devices, and their electrochromic reflective displays change color according to their stored energy level. The ECSDs in this work have enormous potential for use in next-generation smart windows for buildings and as portable energy storage displays.

Electrohydrodynamic jet printing is a promising technology for high-resolution direct printing. This review provides a comprehensive summary of the fabrication and printing methods of various functional materials (and inks) for practical devices.

Establishing dependable, cost-effective electrical connections is vital for enhancing device performance and shrinking electronic circuits. MXenes, combining excellent electrical conductivity, high breakdown voltage, solution processability, and two-dimensional morphology, are promising candidates for contacts in microelectronics. However, their hydrophilic surfaces, which enable spontaneous environmental degradation and poor dispersion stability in organic solvents, have restricted certain electronic applications. Herein, electrohydrodynamic printing technique is used to fabricate fully solution-processed thin-film transistors with alkylated 3,4-dihydroxy-L-phenylalanine functionalized Ti₃C₂T_x (AD-MXene) as source, drain, and gate electrodes. The AD-MXene has excellent dispersion stability in ethanol, which is required for electrohydrodynamic printing, and maintains high electrical conductivity. It outperformed conventional vacuum-deposited Au and Al electrodes, providing thin-film transistors with good environmental stability due to its hydrophobicity. Further, thin-film transistors are integrated into logic gates and one-transistor-one-memory cells. This work, unveiling the ligand-functionalized MXenes’ potential in printed electrical contacts, promotes environmentally robust MXene-based electronics (MXetronics).