The main priority in photovoltaic (PV) panels is the production of electricity. The transformation of solar energy into electricity depends on the operating temperature in such a way that the performance increases with the decreasing temperatures. In the existing literature, different cooling techniques can be found. The purpose of most of them is to use air or water as thermal energy carriers. This work is focused on the use of air as a working fluid whose movement is either induced by natural convection or forced by means of a fan. The aim of this study is to characterise the electrical behaviour of the solar panels in order to improve the design of photovoltaic installations placed in roof applications ensuring low operating temperatures which will correct and reverse the effects produced on efficiency by high temperature. To do this, a test installation has been constructed at the Universidad Politécnica de Cartagena in Spain. In this paper, the results of the tests carried out on two identical solar panels are included. One of them has been modified and mounted on different channels through which air flows. The different studies conducted show the effects of the air channel cross-section, the air velocity, and the panel temperature on the electrical parameters of the solar panels, such as the voltage, current, power, and performance. The results conclude that the air space between the photovoltaic panels and a steel roof must be high enough to allow the panel to be cooled and consequently to achieve higher efficiency.

Cooling towers are evaporative heat transfer devices in which atmospheric air cools warm water, with direct contact between the water and the air by evaporating part of the water. The principle of operation of cooling towers requires spraying or distributing water over a heat transfer surface (packing) across or through which a stream of air is passing. As a result, water droplets are incorporated in the air stream and,depending on the velocity of the air, will be taken away from the unit. This is known as drift. Although cooling tower drift is objectionable for several reasons, the most hazardous problem concerning human health is the emission of chemicals or microorganisms into the atmosphere. Undoubtedly, regarding microorganisms, the most well-known pathogens are the multiple species of bacteria collectively known as legionella. The binomial water distribution system-drift eliminator is identified to be that mainly responsible for cooling tower drift. While water distribution systems affect the mechanics of setting up the drops, drift eliminators work by changing the direction of the airflow and separating droplets from the airstream through inertial impact. The drift eliminator’s performance can be quantified mainly by two factors: droplet collection efficiency and the pressure drop across the eliminator. In contrast, water distribution systems are characterized by the pressure drop across itself and the achieved size of the particle spread. Alongside drift, the binomial water distribution system-drift eliminator affects the cooling tower performance. From the reviewed bibliography, some studies assessing the effect of the drift eliminator on cooling tower performance have been found. Nevertheless, no studies regarding the influence of the water distribution system on the cooling tower’s performance have been detected. In this sense, this paper studies the thermal performance of a forced draft counter-flow wet cooling tower fitted with two water distribution systems (the pressure water distribution system (PWDS) and gravity water distribution system (GWDS)) for six drift eliminators for a wide range of air and water mass flow rates. The data registered in the experimental set-up were employed to obtain correlations of the tower characteristic, which defines the cooling tower’s thermal performance. The outlet water temperature predicted by these correlations was compared with the experimentally registered values, obtaining a maximum averaged difference of ±0.95%.The authors wish to acknowledge the collaboration of the Ministerio de Educación y Ciencia (Spanish Education and Science Ministry) for their support of project PN I+D+I 2008-2011 ENE2010-21679-C02- 02