Organically-modified magadiite (MAG–CTAB–KH550) was synthesized via ion-exchange method and condensation reaction in the presence of pure magadiite (MAG), cetyltrimethylammonium bromide (CTAB) and γ-aminopropyltriethoxysilane (KH550) in aqueous solution in this research. This new adsorbent material was studied using scanning electron microscope (SEM), X-ray diffraction (XRD), Fourier transforms infrared spectroscopy (FTIR), and N2 adsorption/desorption isotherms process. It was found that the MAG–CTAB–KH550 has high Brunaur-Emmet-Teller (BET) specific surface area and mesoporous pore size distribution which enhanced its ability to remove phenol in aqueous solution; and, the value of pH has a relatively large impact on the adsorption behavior of the sorbent. Finally, the adsorptive behavior of the mesoporous material on phenol was followed pseudo-second-order kinetic adsorption model. In contrast, the adsorption equilibrium isotherm was better performed Langmuir isotherm model than the Freundlich isotherm model; in addition, the results also showed that the MAG–CTAB–KH550 had a better adsorption capacity and removal efficiency than MAG.
30 May 2022 in Journal of Polymers and the Environment
The magadiite–magnetite (MAG–Fe3O4) nanocomposite has great potential applications in the field of biomaterials research. It has been used as a novel magnetic sorbent, prepared by co-precipitation method. It has the dual advantage of having the magnetism of Fe3O4 and the high adsorption capacity of pure magadiite (MAG). MAG–Fe3O4 was characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and vibrating sample magnetometer (VSM). The results showed that Fe3O4 nanoparticles were deposited on the interlayer and surface of magadiite. MAG–Fe3O4 was treated as an adsorbent for methylene blue (MB) removal from aqueous solutions. The adsorption properties of MAG–Fe3O4 were investigated on methylene blue; however, the results showed that the adsorption performance of MAG–Fe3O4 improved remarkably compared with MA and Fe3O4. The adsorption capacity of MAG–Fe3O4 and the removal ratio of methylene blue were 93.7 mg/g and 96.2%, respectively (at 25 °C for 60 min, pH = 7, methylene blue solution of 100 mg/L, and the adsorbent dosage 1 g/L). In this research, the adsorption experimental data were fitted and well described using a pseudo-second-order kinetic model and a Langmuir adsorption isotherm model. The research results further showed that the adsorption performance of MAG–Fe3O4 was better than that of MAG and Fe3O4. Moreover, the adsorption behavior of MB on MAG–Fe3O4 was investigated to fit well in the pseudo-second-order kinetic model with the adsorption kinetics. The authors also concluded that the isothermal adsorption was followed by the Langmuir adsorption isotherm model; however, it was found that the adsorption of the MAG–Fe3O4 nanocomposite was a monolayer adsorption.
3 November 2021 in Journal of Inorganic and Organometallic Polymers and Materials
The crystalline size of polypropylene (PP) filled with montmorillonite (MMT) was studied by X-ray diffraction (XRD). The isothermal crystallization behavior of polypropylene was studied by means of differential scanning calorimetry (DSC). The Avrami equation was used to describe the isothermal crystalline kinetics of PP/MMT composites. The result showed that the addition of MMT decreased the crystalline size Lhkl of the polymer. MMT was used as nucleating agent during isothermal crystallization process of polypropylene. The addition of montmorillonite decreased the crystallization time of the polypropylene and the melt point was raised. The value of Avrami exponent n was related with the crystallization temperature. The value of Avrami pre-index factor k of PP/MMT composite was decreased with increasing crystallization temperature. The value of half crystallization time t1/2 of PP/MMT composite was less than that of PP at a given crystallization temperature, signifying that montmorillonite acted as nucleating agent, accelerated the overall crystallization process.