This paper describes the intelligent Automated Guided Vehicle (AGV) control system using Fuzzy Rule Interpolation (FRI) method. The AGV used in this paper is a virtual vehicle simulated using computer. The purpose of the control system is to control the simulated AGV by moving along the given path towards a goal. Some obstacles can be placed on or near the path to increase the difficulties of the control system. The intelligent AGV should follow the path by avoiding these obstacles. This system consists of two fuzzy controllers. One is the original FRI controller that mainly controls the forward movement of the AGV. Another one is the proposed reverse movement controller that deals with the critical situation. When the original FRI controller faces the critical situation, our proposed reverse controller will control the AGV to reverse and move forward towards the goal. Our proposed reverse controller utilizes the advantage of FRI method. In our system, we also develop a novel switching system to switch from original to the developed reverse controller.
1 January 1996 in Japanese Journal of Crop Science
Texture evaluation is manually performed in general, and such analytical tasks can get cumbersome. In this regard, a neural network model is employed in this study. This paper describes a system that can estimate the food texture of snacks. The system comprises a simple equipment unit and an artificial neural network model. The equipment simultaneously examines the load and sound when a snack is pressed. The neural network model analyzes the load change and sound signals and then outputs a numerical value within the range (0,1) to express the level of textures such as “crunchiness” and “crispness”. Experimental results validate the model’s capacity to output moderate texture values of the snacks. In addition, we applied the convolutional neural network (CNN) model to classify snacks and the capability of the CNN model for texture estimation is discussed.
Cedar and cypress used for wooden construction have high moisture content after harvesting. To be used as building materials, they must undergo high-temperature drying. However, this process causes internal cracks that are invisible on the outer surface. These defects are serious because they reduce the strength of the timber, i.e., the buckling strength and joint durability. Therefore, the severity of internal cracks should be evaluated. A square timber was cut at an arbitrary position and assessed based on the length, thickness, and shape of the cracks in the cross-section; however, this process is time-consuming and labor-intensive. Therefore, we used a convolutional neural network (CNN) to automatically evaluate the severity of cracks from cross-sectional timber images. Previously, we used silver-painted images of cross-sections so that the cracks are easier to observe; however, this task was burdensome. Hence, in this study, we attempted to classify crack severity using ResNet (Residual Neural Network) from unpainted images. First, ResNet50 was employed and trained with supervised data to classify the crack severity level. The classification accuracy was then evaluated using test images (not used for training) and reached 86.67%. In conclusion, we confirmed that the proposed CNN could evaluate cross-sectional cracks on behalf of humans.
Cedar and other timbers used for construction generally undergo a high-temperature drying process after being harvested to maintain their quality. However, internal cracks occur during this process. This is an issue because it deteriorates the structural performance, such as buckling strength and joint durability of the timber. Since preventing these internal cracks is difficult, their severity must be examined manually. Currently, the length, thickness, and area of the cracks on a cross-sectional surface of square timber are measured using calipers. However, this process is time-consuming and labor-intensive. Therefore, we employed a convolutional neural network (CNN), widely used in artificial intelligence applications, to automatically evaluate the severity of cracks from cross-sectional images of timber. A novel CNN was constructed and experimentally evaluated in this study. The average classification accuracy was 85.67%.
1 October 2019 in Transactions of the Materials Research Society of Japan
Many companies have been attempting to transfer the skills and knowledge of skilled workers to other inexperienced workers. The establishment of an efficient training method is also desired for gas tungsten arc welding (GTAW), which has high demand in the production fields of industrial equipment. This study focused on the brightness of the backside weld pool changing under GTAW conditions. The backside weld pool images during welding of a stainless steel plate were taken with a charge coupled device (CCD) camera from the bottom of the welding stage made of glass. The situation of the weld pool at the backside of the plate was visualized by a brightness map of the backside weld pool with the brightness on the horizontal axis and the number of pixels on the vertical axis. From this map, the torch control technique and quality of the backside bead could be numerically evaluated. Therefore, the map suggests that the GTAW skills could be visualized. This could improve welding skill easily and also contribute to highly efficient training, education, and transfer of skills, because the brightness map of the backside weld pool reveals the weaknesses of the welder.