Homogeneous nucleation under isothermal conditions is modeled at the kinetic level. A Fokker-Planck-like equation with nonlinear coefficients that describes this process is solved analytically by a method based on boundary-layer theory combined with the Green’s-function technique. Computing the fundamental solution (propagator) of the suitably transformed governing equation, the distribution function of newly forming clusters is obtained in approximate form. Via this quantity, other important characteristics–such as nucleation rate, integrated flux, or time lag–of the nucleation are determined. It is shown that our results are in much better agreement with purely numerical simulations and experimental data than other previous analytical approaches.
This work deals with the nucleation of crystals in confined systems in response to the recent high interest in research on crystallization in emulsion and microemulsion droplets. In these confined systems, crystallization often occurs at high supercooling; thus, nucleation determines the overall crystallization process. A decrease in the volume of the confined mother phase leads to the higher supercooling needed for the phase transition. We have numerically solved kinetic equations in order to determine the conditions under which the first crystal nuclei are formed by homogeneous and heterogeneous nucleation from supercooled melt and supersaturated solution, depending on the volume of the mother phase. Supersaturation (or supercooling) increases with decreasing volume of the mother phase. The nucleation barrier depends linearly on the logarithm of volume of the mother phase in all cases under consideration, as follows from the numerical solution of kinetic equations.
This paper deals with the structuring of polycrystalline diamond thin films using the technique of nanosphere lithography. The presented multistep approaches relied on a spin-coated self-assembled monolayer of polystyrene spheres, which served as a lithographic mask for the further custom nanofabrication steps. Various arrays of diamond nanostructures—close-packed and non-close-packed monolayers over substrates with various levels of surface roughness, noble metal films over nanosphere arrays, ordered arrays of holes, and unordered pores—were created using reactive ion etching, chemical vapour deposition, metallization, and/or lift-off processes. The size and shape of the lithographic mask was altered using oxygen plasma etching. The periodicity of the final structure was defined by the initial diameter of the spheres. The surface morphology of the samples was characterized using scanning electron microscopy. The advantages and limitations of the fabrication technique are discussed. Finally, the potential applications (e.g., photonics, plasmonics) of the obtained nanostructures are reviewed.