Teresa Orłowska-Kowalska

Prof. Teresa Orłowska-Kowalska

Department of Electrical Machines, Drives and Measurements, Wroclaw University of Science and Technology, Wyb. Wyspianskiego 27, 50-370 Wroclaw, Poland
orcid

Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 June 2022 in IEEE Access
Verified
Journal Article
Open access
Teresa Orłowska-KowalskaTeresa Orłowska-Kowalska
Teresa Orłowska-Kowalska
Marcin WolkiewiczMarcin Wolkiewicz
Marcin Wolkiewicz
PPPrzemysław Pietrzak
Przemysław Pietrzak
Maciej SkowronMaciej Skowron
Maciej Skowron
PEPawel Ewert
Pawel Ewert
CKCzeslaw T. Kowalski
Czeslaw T. Kowalski
The issues of monitoring and fault diagnosis of drives with permanent magnet synchronous motors (PMSMs) are currently very relevant because of the increasing use of these drives in safety-critical devices. Every year, more and more articles are published on this subject. Therefore, the objective of this article is to update the overview of diagnostic methods and techniques for PMSM drives. Each of the main chapters of the article focuses on a specific element of the drive system (motor, power converter, measuring sensors), with particular emphasis on the components of the motor (stator windings, magnets, bearings, and rotor). The main sections on PMSM fault diagnosis are divided according to the type of methods used to obtain the symptoms of the damage. In addition, a review of methods that use the analysis of signals of the control structure for the diagnosis of damage to a vector-controlled motor is presented, as well as the latest achievements of researchers in the field of shallow and deep neural networks for the detection and classification of failures of PMSM drives. Based on the analyses presented in the literature, some development trends and challenges related to the development of diagnostics and fault-tolerant control of PMSM drives are discussed in the conclusion part.

20 March 2020 in Energies
Verified
Journal Article
Open access
PDF file
Maciej SkowronMaciej Skowron
Maciej Skowron
Teresa Orłowska-KowalskaTeresa Orłowska-Kowalska
Teresa Orłowska-Kowalska
Marcin WolkiewiczMarcin Wolkiewicz
Marcin Wolkiewicz
CKCzeslaw T. Kowalski
Czeslaw T. Kowalski
In this paper, the idea of using a convolutional neural network (CNN) for the detection and classification of induction motor stator winding faults is presented. The diagnosis inference of the stator inter-turn short-circuits is based on raw stator current data. It offers the possibility of using the diagnostic signal direct processing, which could replace well known analytical methods. Tests were carried out for various levels of stator failures. In order to assess the sensitivity of the applied CNN-based detector to motor operating conditions, the tests were carried out for variable load torques and for different values of supply voltage frequency. Experimental tests were conducted on a specially designed setup with the 3 kW induction motor of special construction, which allowed for the physical modelling of inter-turn short-circuits in each of the three phases of the machine. The on-line tests prove the possibility of using CNN in the real-time diagnostic system with the high accuracy of incipient stator winding fault detection and classification. The impact of the developed CNN structure and training method parameters on the fault diagnosis accuracy has also been tested.

1 February 2022 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
Maciej SkowronMaciej Skowron
Maciej Skowron
Teresa Orłowska-KowalskaTeresa Orłowska-Kowalska
Teresa Orłowska-Kowalska
CKCzeslaw T. Kowalski
Czeslaw T. Kowalski
Permanent magnet synchronous motors (PMSMs) due to their numerous advantages, such as simple and compact design, easy production and high power-to-weight ratio, high power factor in the range of constant torque, low inertia, and more precise control compared to other electric motors, are increasingly used in various applications, such as electric vehicles, wind power, home, and industrial appliances. However, PMSMs, such as other electrical machines, may subject to various types of damage during the operation. Due to their use in devices of a critical nature (e.g., transport applications), the detection of these damages at their initial stage constitutes an extremely important issue. In this article, we investigate the possibility of the permanent magnets (PMs) faults detection of PMSM using a convolutional neural network (CNN) based on the raw stator current data. The article aims to show the possibility of detecting the PM demagnetization using the information obtained directly from the measured current signal as well as indicate the influence of simultaneous incipient interturn short circuits and the operating condition of the drive on the accuracy of the developed diagnostic system. The results of the experimental research carried out on a specially designed PMSM show the impressive capability of the developed CNN-based diagnostic system to precisely detect the initial phase of PMs damage.

13 July 2022 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
PPPrzemysław Pietrzak
Przemysław Pietrzak
Marcin WolkiewiczMarcin Wolkiewicz
Marcin Wolkiewicz
Teresa Orłowska-KowalskaTeresa Orłowska-Kowalska
Teresa Orłowska-Kowalska
The diagnosis of permanent magnet synchronous motor (PMSM) faults has been the subject of much research in recent years, due to the growing reliability and safety requirements for drive systems. This article concerns PMSM stator winding fault detection and classification. A novel intelligent diagnosis approach is proposed, based on the bispectrum analysis of a stator phase current and the convolutional neural network (CNN). Rather than using raw phase current signals, bispectrum is applied for symptom extraction and utilized as the input for a pretrained CNN model. The CNN model is used for automatic inference on the winding condition of the PMSM stator. Experimental results are presented to validate the proposed algorithm. The classification effectiveness of the developed CNN is as high as 99.4%. This article also presents the possibility of improving the accuracy of the CNN model and reducing the training time by properly tuning the training parameters. The CNN model learning time is only about one minute. The fault classifier model is developed in Python programming language, avoiding the cost of purchasing additional software.

13 February 2019 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Maciej SkowronMaciej Skowron
Maciej Skowron
Marcin WolkiewiczMarcin Wolkiewicz
Marcin Wolkiewicz
Teresa Orłowska-KowalskaTeresa Orłowska-Kowalska
Teresa Orłowska-Kowalska
CKCzeslaw T. Kowalski
Czeslaw T. Kowalski
Electrical winding faults, namely stator short-circuits and rotor bar damage, in total constitute around 50% of all faults of induction motors (IMs) applied in variable speed drives (VSD). In particular, the short circuits of stator windings are recognized as one of the most difficult failures to detect because their detection makes sense only at the initial stage of the damage. Well-known symptoms of stator and rotor winding failures can be visible in the stator current spectra; however, the detection and classification of motor windings faults usually require the knowledge of human experts. Nowadays, artificial intelligence methods are also used in fault recognition. This paper presents the results of experimental research on the application of the stator current symptoms of the converter-fed induction motor drive to electrical fault detection and classification using Kohonen neural networks. The experimental tests of a diagnostic setup based on a virtual measurement and data pre-processing system, designed in LabView, are described. It has been shown that the developed neural detectors and classifiers based on self-organizing Kohonen maps, trained with the instantaneous symmetrical components of the stator current spectra (ISCA), enable automatic distinguishing between the stator and rotor winding faults for supplying various voltage frequencies and load torque values.

13 February 2023 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
ZTZoheir TIR
Zoheir TIR
Teresa Orłowska-KowalskaTeresa Orłowska-Kowalska
Teresa Orłowska-Kowalska
HAHafiz Ahmed
Hafiz Ahmed
Azeddine HouariAzeddine Houari
Azeddine Houari
Because of their advantages, speed sensorless induction motor drives have received a lot of attention in the academic and industrial communities over the last decade. Despite the recent developments in this area, the performance of sensorless variable-speed IM drives in ultra-low and zero electrical rotor speeds and regeneration mode remains a big challenge. To obtain acceptable results under unobservable conditions, an adaptive high gain observer based MRAS speed estimator is proposed in this article. The stability analysis of the proposed algorithm is proved using the Lyapunov stability theorem. Moreover, the efficiency and feasibility of the proposed estimator are verified by comparative experiments.