With the continuous development of artificial intelligence technology, visible-light positioning (VLP) based on machine learning and deep learning algorithms has become a research hotspot for indoor positioning technology. To improve the accuracy of robot positioning, we established a three-dimensional (3D) positioning system of visible-light consisting of two LED lights and three photodetectors. In this system, three photodetectors are located on the robot’s head. We considered the impact of line-of-sight (LOS) and non-line-of-sight (NLOS) links on the received signals and used gated recurrent unit (GRU) neural networks to deal with nonlinearity in the system. To address the problem of poor stability during GRU network training, we used a learning rate attenuation strategy to improve the performance of the GRU network. The simulation results showed that the average positioning error of the system was 2.69 cm in a space of 4 m × 4 m × 3 m when only LOS links were considered and 2.66 cm when both LOS and NLOS links were considered with 95% of the positioning errors within 7.88 cm. For two-dimensional (2D) positioning with a fixed positioning height, 80% of the positioning error was within 9.87 cm. This showed that the system had a high anti-interference ability, could achieve centimeter-level positioning accuracy, and met the requirements of robot indoor positioning.
To improve the accuracy of personnel positioning in underground coal mines, in this paper, we propose a convolutional neural network (CNN) three-dimensional (3D) visible light positioning (VLP) system based on the Inception-v2 module and efficient channel attention mechanism. The system consists of two LEDs and four photodetectors (PDs), with the four PDs on the miner’s helmet. Considering the height fluctuation of PD and the impact of wall reflection on the received light power, we adopt the Inception module to perform a multi-scale extraction of the features of the received light power, thus solving the limitation of the single-scale convolution kernel on the positioning accuracy. In order to focus on the information that is more critical to positioning among the numerous input features, giving different features of the optical power data corresponding weights, we use an efficient channel attention mechanism to make the positioning model more accurate. The simulation results show that the average positioning error of the system was 1.63 cm in the space of 6 m × 3 m × 3.6 m when both the line-of-sight (LOS) and non-line-of-sight (NLOS) links were considered, with 90% of the localization errors within 4.55 cm. During the experimental stage, the average positioning error was 11.12 cm, with 90% of the positioning errors within 28.75 cm. These show that the system could achieve centimeter-level positioning accuracy and meet the requirements for underground personnel positioning in coal mines.
Wind speed, wind direction, humidity, temperature, altitude, and other factors affect wind power generation, and the uncertainty and instability of the above factors bring challenges to the regulation and control of wind power generation, which requires flexible management and scheduling strategies. Therefore, it is crucial to improve the accuracy of ultra-short-term wind power prediction. To solve this problem, this paper proposes an ultra-short-term wind power prediction method with MIVNDN. Firstly, the Spearman’s and Kendall’s correlation coefficients are integrated to select the appropriate features. Secondly, the multi-strategy dung beetle optimization algorithm (MSDBO) is used to optimize the parameter combinations in the improved complete ensemble empirical mode decomposition with adaptive noise (ICEEMDAN) method, and the optimized decomposition method is used to decompose the historical wind power sequence to obtain a series of intrinsic modal function (IMF) components with different frequency ranges. Then, the high-frequency band IMF components and low-frequency band IMF components are reconstructed using the t-mean test and sample entropy, and the reconstructed high-frequency IMF component is decomposed quadratically using the variational modal decomposition (VMD) to obtain a new set of IMF components. Finally, the Nons-Transformer model is improved by adding dilated causal convolution to its encoder, and the new set of IMF components, as well as the unreconstructed mid-frequency band IMF components and the reconstructed low-frequency IMF, component are used as inputs to the model to obtain the prediction results and perform error analysis. The experimental results show that our proposed model outperforms other single and combined models.
24 April 2020 in IEEE Transactions on Plasma Science
There is a multipath effect caused by multireflections between the plasma and the vehicle surface, and there are coupling characteristics between array antennas. These two errors will seriously affect the quality of navigation signal. To solve the mutual coupling of uniform linear array (ULA) of plasma, a direction-of-arrival (DOA) estimation algorithm based on mutual coupling correction is proposed. The algorithm is based on the special structure of mutual coupling matrix (MCM) of ULA and combines spatial smoothing algorithms. It solves a quadratic optimization problem under the linear constraint and utilizes peak search technology to obtain DOA. The effectiveness of the proposed algorithm is verified by the simulation results. Numerical simulation is applied in this article to analyze the influence of array antenna from the plasma. In addition, array antenna is calibrated with the mutual coupling calibration information estimated by the algorithm. The result of antenna calibration validates the correctness of the simulation conclusion.
9 November 2017 in IEEE Transactions on Plasma Science
Plasma has a significant effect on radio communication between reentry vehicles and control station on the ground, as well as the communication between reentry vehicles and satellite in space. This kind of influence creates sharp power of navigation and control signal attenuation. However, when signal attenuation becomes increasingly serious, it can interrupt communication between reentry vehicles and control station or satellite, thereby resulting in blackout. Beamforming technology can improve the gain of wave direction of the satellite to reduce signal attenuation from the plasma. Plasma affects the performance of array antenna, which is mainly manifested in the change of parameters, such as the antenna pattern and reflection coefficient. Numerical simulation is applied in this paper to analyze the influence of array antenna parameters from the plasma. In addition, the measurement of antenna test validates the correctness of the simulation conclusion. The antenna reflection and attenuation of satellite navigation signal are serious with increasing plasma density.