This work introduces the concept of flexible operation in the design of solar thermal utility systems for low temperature processes. The design objectives are: (a) The supply of the thermal needs of the process (heat duty and minimum required temperature), and (b) the maximization of the operating time during the day. The approach shows how the network structure is defined by adjusting the mass flow rate and the inlet temperature of the working fluid to achieve the smallest collector surface area. This work emphasizes the need to specify the solar network structure, which is comprised of two main elements: The number of lines in parallel and the number of collectors in series in each line. The former of these two design specifications is related to the heat load that the system will supply, while the latter is directly related to the delivery temperature. A stepwise design approach is demonstrated using two case studies where it is shown that the detailed design of the solar collector network structure is fundamental for a successful thermal integration with minimum investment. In this paper, the design methodology is based on flat-plate solar collectors, but it can be extended to any other type of low temperature solar technology.

The simultaneous design and specification of heat exchangers of the plate-and-frame type is analyzed. A pictorial representation of the design space is used to guide the designer toward the selection of the geometry that best meets the heat duty within the limitations of pressure drop. The design space is represented by a bar plot where the number of thermal plates is plotted for three conditions: (1) for fully meeting the required heat load, (2) for fully absorbing the allowable pressure drop in the cold stream, and (3) for fully absorbing the allowable pressure drop in the hot stream. This type of plot is suitable for representing the design space, given the discrete nature of the plate geometrical characteristics, such as effective plate length and plate width. Applications of the use of bypasses as a design strategy are also presented.