Supercritical fluid extraction (SFE), which has received much interest in its use and further development for industrial applications, is a method that offers some advantages over conventional methods, especially for the palm oil industry. SC-CO₂ refers to supercritical fluid extraction (SFE) that uses carbon dioxide (CO₂) as a solvent which is a nontoxic, inexpensive, nonflammable, and nonpolluting supercritical fluid solvent for the extraction of natural products. Almost 100% oil can be extracted and it is regarded as safe, with organic solvent-free extracts having superior organoleptic profiles. The palm oil industry is one of the major industries in Malaysia that provides a major contribution to the national income. Malaysia is the second largest palm oil and palm kernel oil producer in the World. This paper reviews advances in applications of supercritical carbon dioxide (SC-CO₂) extraction of oils from natural sources, in particular palm oil, minor constituents in palm oil, producing fractionated, refined, bleached, and deodorized palm oil, palm kernel oil and purified fatty acid fractions commendable for downstream uses as in toiletries and confectionaries.

Supercritical carbon dioxide (SC-CO₂) was introduced for obtaining premium grade cocoa butter quality fat from the waste of mango seed kernel (MSK), where the Soxhlet method was also used for the comparison. Six different varieties of MSK were selected to be extracted using SC-CO₂ at pressures of 35 and 42.2 MPa, temperatures of 60°C and 72°C, and constant CO₂ flow rate at 3.4 ml/min. The total fat contents of MSK varieties ranged from 64 to 135 g/kg at SC-CO₂ extraction and from 76 to 137 g/kg at Soxhlet extraction methods. The fatty acid constituents of fat yield of all varieties extracted using SC-CO₂ ranged from 6.9% to10.9% palmitic acid, 32.8% to 47.6% stearic acid, 37% to 47.3% oleic acid, and 3.7% to 6.9% linoleic acid. However, the physicochemical properties and fatty acid constituents of SC-CO₂ extracted MSK fats were found to be comparable to that of commercial cocoa butter.

Landfill leachate is a highly polluted and generated from water infiltration through solid waste produced domestically and industrially. In this study, a coagulation–flocculation process using a combination of Polyaluminium chloride (PACl) as a coagulant and Dimocarpus longan seed powder (LSP) as coagulant aid was used in treating landfill leachate. LSP has been tested as the main coagulant and as coagulant aid with PACl. As the main coagulant, the optimum dosage and pH for PACl were 5 g/L and 6, respectively, with removal efficiencies of 67.44%, 99.47%, and 98% for COD, SS, and color, respectively. For LSP as the main coagulant, results show that LSP is not effective where the removal efficiencies obtained for COD, SS, and color were 39.40%, 22.20%, and 28.30%, respectively, with the optimum dosage of 2 g/L and pH 4. The maximum removal efficiencies of COD, SS, and color were 69.19%, 99.50%, and 98.80%, respectively, when LSP was used as coagulant aid with PACl. Results show that using LSP as coagulant aid was found to be more effective in the removal of COD, SS, and color with less PACl dosage. The PACl dosage was decreased from 5 to 2.75 g/L when LSP was used as a coagulant aid. Cost estimation for using PACl alone and using LSP as the coagulant aid showed a reduction in the cost of approximately 40% of the cost of using PACl alone. Overall, this study confirmed the efficiency of LSP to be used as a natural coagulant aid in leachate treatment.