Qifu Tang

Dr. Qifu Tang

orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 February 2015 in IEEE Sensors Journal
Verified
Journal Article
Closed access
QTQifu Tang
Qifu Tang
DPDonglin Peng
Donglin Peng
LWLiang Wu
Liang Wu
XCXihou Chen
Xihou Chen
This paper introduces a noncontact, low-cost, and reliable inductive sensor for angular displacement measurement. It is suitable to work in harsh industrial environments. The sensor has simple structure consisting of three key parts: a ferromagnetic stator, which is a pure plane; a ferromagnetic rotor, which has face slots; and four layers of planar copper coils, including primary and secondary coils. Primary coils are supplied with two orthogonal 4000-Hz ac, and secondary coils output a signal whose phase is proportional to angular displacement. Primary coils are designed with sinusoidal shape, so that magnetic field between the stator and rotor has approximately sinusoidal distribution, and finally linearity between the phase variation of output signal and angular displacement is well helped by this design. The structure and working principles of the sensor are explained in detail. Moreover, a sensor model was simulated to verify the feasibility of the sensor working principles and a sensor prototype was designed for actual experiment. At last actual experiment results are given and analyzed, showing that the sensor prototype has achieved accuracy better than ±12 arcsec in the range of 0°-360°, and this kind of sensor may have a better performance by improving the layout of primary coils and front-end signal-process circuit.

30 November 2021 in IEEE Access
Verified
Journal Article
Open access
WGWenzheng Gao
Wenzheng Gao
HSHong Shi
Hong Shi
QTQifu Tang
Qifu Tang
This paper proposes a new planar inductive sensor with printed circuit boards (PCB) based stator and rotor, which can perform more precision measurement than traditional inductive angular displacement sensors. The sensor uses PCB technique to realize accurately configured planar coils. The stator consists of a ferromagnetic base plate and a PCB with three groups of circular excitation coils and two groups of sine shape pickup coils working as two sense channels. The rotor consists of a ferromagnetic base plate and a PCB with two circles of copper pieces. Copper pieces on the rotor PCB produce eddy current in the time-varying magnetic field and alter the outputs of two sense channels of pickup coils cyclically with the rotor’s rotation. Two fine sense channels can make incremental angle measurement individually and work together to make absolute angle measurement. A prototype with 63 and 64 period sense channels was designed and developed for experiments, and test results show that it was finally examined with short-period error of 14.7" and full range error of 20.6". The possessed characteristics of inductive principle, absolute measuring and good accuracy make this type of sensor is very suitable for high precision, reliable measurement in harsh environments.

2 April 2019 in IEEE Sensors Journal
Verified
Journal Article
Closed access
PLPinggui Luo
Pinggui Luo
QTQifu Tang
Qifu Tang
HJHuan Jing
Huan Jing
XCXihou Chen
Xihou Chen
This paper presents an inductive based sensor for absolute angular position measurement. Its structure is basically similar to a resolver, but it has two groups of pickup coils that use the same magnetic field to produce two different signals for absolute measurement and online self-calibration. The proposed sensor mainly consists of a ferromagnetic stator, two ferromagnetic rotors and four groups of coils. Two groups of coils in the stator working as excitation coils are supplied with quadrature Alternating Current (AC) signals to generate quadrature magnetic fields both in temporal and spatial domains. The other two groups of coils in the rotors working as pickup coils receive magnetic fields to produce two sine signals whose phases are proportional to the displacement of the rotors. However, the phases of the sine signals have different periods of variation in the full measurement range. The sensor uses this different phase variation to determine absolute angular position and perform online self-calibration. A sensor model has been built and simulated firstly to verify the feasibility of the sensor. Then, a sensor prototype was developed based on the sensor model. Experimental results of the sensor prototype show that the sensor has big but regular measurement error using any group of pickup coils before conducting calibration, and finally the measurement error reduced up to 85% by use of the online self-calibration method presented in this paper.

23 May 2018 in IEEE Sensors Journal
Verified
Journal Article
Closed access
QTQifu Tang
Qifu Tang
LWLiang Wu
Liang Wu
XCXihou Chen
Xihou Chen
DPDonglin Peng
Donglin Peng
This paper presents a non-contact inductive linear displacement sensor which is based on planar coils realized by Printed Circuit Board (PCB) technique. The sensor mainly consists of a ferromagnetic stator, a ferromag- netic mover, several excitation coil-PCBs and a pickup coil-PCB. Excitation coil-PCBs are embedded in the mover and generate quadrature magnetic fields both in temporal and spatial domains. The stator and mover confine the magnetic fields to propagate between them. Pickup coil-PCB is located between the stator and mover to receive magnetic fields and outputs a signal whose phase is proportional to the displacement of the mover. Simulations of a 3D sensor model and final experiment of a prototype are introduced and both verify the feasibility of this sensor. In order to overcome inexact quadrature in spatial domain of magnetic fields caused by asymmetric mover structure, a simple but effective compensation method realized in temporal domain is employed by the prototype. Experimental results show that the prototype has original measurement error of less than 50μm in the range of 0mm to 208mm, and moreover the error is still of great regularity so that the sensor may have better performance if there is digital calibration for measurement data or improvement in sensor structure.

6 August 2020 in IEEE Sensors Journal
Verified
Journal Article
Closed access
XGXingying Gu
Xingying Gu
QTQifu Tang
Qifu Tang
DPDonglin Peng
Donglin Peng
DWDaodao Weng
Daodao Weng
This paper presents an inductive linear displacement sensor with bilateral sensing units, which consists of a stator with excitation coils, two movers with pickup coils and a mover base. Two movers have the same structure and work on two sides of the stator to realize bilateral sensing. Bilateral sensing units contribute to reducing the negative influence from the gap change between the movers and stator on the measurement performance of the sensor, because bilateral mover structure is able to maintain the sum of two side gaps constant and thus reach good magnetic coupling with the stator. Comparison experiments of the prototypes in different working gaps have been implemented and verified that the sensor with bilateral sensing units has better repeatability and accuracy than that with unilateral sensing unit. Based on the regular errors shown in the measurement results of the proposed bilateral sensing sensor in comparison experiments, this paper also presents the detailed analysis about the sources of some dominating error components. Accordingly, a sensor prototype with improved designs for reducing measurement errors was developed. Final experimental results of the improved sensor prototype show that the accuracy is better than 15μm and the repeatability is about 7μm with less than 1.2μm resolution in the range of 0mm∼288mm.

4 January 2022 in IEEE Sensors Journal
Verified
Journal Article
Closed access
SSShizheng Sun
Shizheng Sun
YHYu Han
Yu Han
HZHui Zhang
Hui Zhang
ZHZeyin He
Zeyin He
QTQifu Tang
Qifu Tang
This articledevelops a novel probe-type inductive angular displacement sensor based on time-grating, which is suitable for large-diameter hollow rotary table position detection of the heavy-duty machine tools. It abandons the traditional sensor precise marking lines in spatial domain, and integrates the tested mechanical component with the sensor, which realizes the angular displacement measurement directly. The sensor is divided into three parts: 1) a permalloy probe, which is adopted the simple structure to reduce the assembly errors; 2) a 45-steel rotor, which is a standard spur gear in a heavy-duty machine tool rotary table transmission system; 3) three groups of copper coils, which include sinusoidal coils, cosine coils and inductive coils. The theoretical model of angular displacement measurement is derived by means of mathematical equation in detail. Then the feasibility of the sensor structure is verified by finite element simulation. After that, a sensor prototype is built and tested in the laboratory, showing that the sensor has an original error of ±0.018° (approximately ± $64^{\prime \prime }$ ) over a full 360° range. The error analysis found that the systematic error is the main component. As a result, the mechanical structure and angular displacement algorithm of the sensor are optimized, which can significantly reduce the original errors of the sensor. After optimization, the final accuracy of the sensor is within ±0.0012° (approximately ± $4.4^{\prime \prime }$ ) in the range of 0°–360°.