Engineering the electrochemical reactor of a redox flow battery (RFB) is critical to delivering sufficiently high power densities, as to achieve cost-effective, grid-scale energy storage. Cell-level resistive losses reduce RFB power density and originate from ohmic, kinetic, or mass transfer limitations. Mass transfer losses affect all RFBs and are controlled by the active species concentration, state-of-charge, electrode morphology, flow rate, electrolyte properties, and flow field design. The relationship among flow rate, flow field, and cell performance has been qualitatively investigated in prior experimental studies, but mass transfer coefficients are rarely systematically quantified. To this end, we develop a model describing one-dimensional porous electrode polarization, reducing the mathematical form to just two dimensionless parameters. We then engage a single electrolyte flow cell study, with a model iron chloride electrolyte, to experimentally measure cell polarization as a function of flow field and flow rate. The polarization model is then fit to the experimental data, extracting mass transfer coefficients for four flow fields, three active species concentrations, and five flow rates. The relationships among mass transfer coefficient, flow field, and electrolyte velocity inform engineering design choices for minimizing mass transfer resistance and offer mechanistic insight into transport phenomena in fibrous electrodes.
The development of new high capacity redox active materials is key to realizing the potential of non-aqueous redox flow batteries (RFBs). In this paper, a series of substituted 1,4-dimethoxybenzene based redox active molecules have been developed via a subtractive design approach. Five molecules have been proposed and developed by removing or reducing the bulky substituent groups of DBBB (2,5-di-tert-butyl-1,4-bis(2-methoxyethoxy)benzene), a successful overcharge protection material for lithium-ion batteries. Of these derivatives, 2,3-dimethyl-1,4-dimethoxybenzene (23DDB) and 2,5-dimethyl-1,4-dimethoxybenzene (25DDB) are particularly promising as they demonstrate favorable electrochemical characteristics at gravimetric capacities (161 mA h g−1) that approach the stability limit of chemically reversible dimethoxybenzene based structures. Diffusivity, solubility, and galvanostatic cycling results indicate that both 23DDB and 25DDB molecules have promise for non-aqueous RFBs.
Nonaqueous redox flow batteries are a fast-growing area of research and development motivated by the need to develop low-cost energy storage systems. The identification of a highly conductive, yet selective membrane, is of paramount importance to enabling such a technology. Herein, we report the swelling behavior, ionic conductivity, and species crossover of lithiated Nafion 117 membranes immersed in three nonaqueous electrolytes (PC, PC : EC, and DMSO). Our results show that solvent volume fraction within the membrane has the greatest effect on both conductivity and crossover. An approximate linear relationship between diffusive crossover of neutral redox species (ferrocene) and the ionic conductivity of membrane was observed. As a secondary effect, the charge on redox species modifies crossover rates in accordance with Donnan exclusion. The selectivity of membrane is derived mathematically and compared to experimental results reported here. The relatively low selectivity for lithiated Nafion 117 in nonaqueous conditions suggests that new membranes are required for competitive nonaqueous redox flow batteries to be realized. Potential design rules are suggested for the future membrane engineering work.