Haleh Jahanbakhsh Basherlou

Mrs. Haleh Jahanbakhsh Basherlou

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 February 2020 in Electronics
Verified
Journal Article
Open access
PDF file
Naser Ojaroudi ParchinNaser Ojaroudi Parchin
Naser Ojaroudi Parchin
HBHaleh Jahanbakhsh Basherlou
Haleh Jahanbakhsh Basherlou
Yasir Al-YasirYasir Al-Yasir
Yasir Al-Yasir
Ahmed M. AbdulkhaleqAhmed M. Abdulkhaleq
Ahmed M. Abdulkhaleq
Raed Abd-AlhameedRaed Abd-Alhameed
Raed Abd-Alhameed
Due to the fast development of wireless communication technology, reconfigurable antennas with multimode and cognitive radio operation in modern wireless applications with a high-data rate have drawn very close attention from researchers. Reconfigurable antennas can provide various functions in operating frequency, beam pattern, polarization, etc. The dynamic tuning can be achieved by manipulating a certain switching mechanism through controlling electronic, mechanical, physical or optical switches. Among them, electronic switches are the most popular in constituting reconfigurable antennas due to their efficiency, reliability and ease of integrating with microwave circuitry. In this paper, we review different implementation techniques for reconfigurable antennas. Different types of effective implementation techniques have been investigated to be used in various wireless communication systems such as satellite, multiple-input multiple-output (MIMO), mobile terminals and cognitive radio communications. Characteristics and fundamental properties of the reconfigurable antennas are investigated.

26 January 2019 in Electronics
Verified
Journal Article
Open access
PDF file
Naser Ojaroudi ParchinNaser Ojaroudi Parchin
Naser Ojaroudi Parchin
HBHaleh Jahanbakhsh Basherlou
Haleh Jahanbakhsh Basherlou
Yasir Al-YasirYasir Al-Yasir
Yasir Al-Yasir
Raed Abd-AlhameedRaed Abd-Alhameed
Raed Abd-Alhameed
Ahmed M. AbdulkhaleqAhmed M. Abdulkhaleq
Ahmed M. Abdulkhaleq
JNJames M. Noras
James M. Noras
Reconfigurable antennas play important roles in smart and adaptive systems and are the subject of many research studies. They offer several advantages such as multifunctional capabilities, minimized volume requirements, low front-end processing efforts with no need for a filtering element, good isolation, and sufficient out-of-band rejection; these make them well suited for use in wireless applications such as fourth generation (4G) and fifth generation (5G) mobile terminals. With the use of active materials such as microelectromechanical systems (MEMS), varactor or p-i-n (PIN) diodes, an antenna’s characteristics can be changed through altering the current flow on the antenna structure. If an antenna is to be reconfigurable into many different states, it needs to have an adequate number of active elements. However, a large number of high-quality active elements increases cost, and necessitates complex biasing networks and control circuitry. We review some recently proposed reconfigurable antenna designs suitable for use in wireless communications such as cognitive-ratio (CR), multiple-input multiple-output (MIMO), ultra-wideband (UWB), and 4G/5G mobile terminals. Several examples of antennas with different reconfigurability functions are analyzed and their performances are compared. Characteristics and fundamental properties of reconfigurable antennas with single and multiple reconfigurability modes are investigated.

23 January 2019 in Sensors
Verified
Journal Article
Open access
PDF file
Naser Ojaroudi ParchinNaser Ojaroudi Parchin
Naser Ojaroudi Parchin
HBHaleh Jahanbakhsh Basherlou
Haleh Jahanbakhsh Basherlou
Yasir Al-YasirYasir Al-Yasir
Yasir Al-Yasir
Atta UllahAtta Ullah
Atta Ullah
Raed Abd-AlhameedRaed Abd-Alhameed
Raed Abd-Alhameed
JNJames M. Noras
James M. Noras
In this study, we propose a design of a multi-band slot antenna array applicable for fourth-generation (4G) and fifth-generation (5G) smartphones. The design is composed of double-element square-ring slot radiators fed by microstrip-line structures for easy integration with radio frequency (RF)/microwave circuitry. The slot radiators are located on the corners of the smartphone printed circuit board (PCB) with an overall dimension of 75 × 150 mm2. The proposed multiple-input multiple-output (MIMO) antenna is designed to meet the requirements of 4G and 5G mobile terminals with essential bandwidth for higher data rate applications. For −10 dB impedance bandwidth, each single-element of the proposed MIMO design can cover the frequency ranges of 2.5–2.7 GHz (long-term evolution (LTE) 2600), 3.45–3.8 GHz (LTE bands 42/43), and 5.00–5.45 GHz (LTE band 46). However, for −6 dB impedance bandwidth, the radiation elements cover the frequency ranges of 2.45–2.82 GHz, 3.35–4.00 GHz, and 4.93–5.73 GHz. By employing the microstrip feed lines at the four different sides of smartphone PCB, the isolation of the radiators has been enhanced and shows better than 17 dB isolation levels over all operational bands. The MIMO antenna is implemented on an FR-4 dielectric and provides good properties including S-parameters, efficiency, and radiation pattern coverage. The performance of the antenna is validated by measurements of the prototype. The simulation results for user-hand/user-head impacts and specific absorption rate (SAR) levels of the antenna are discussed, and good results are achieved. In addition, the antenna elements have the potential to be used as 8-element/dual-polarized resonators.

10 May 2019 in Electronics
Verified
Journal Article
Open access
PDF file
Naser Ojaroudi ParchinNaser Ojaroudi Parchin
Naser Ojaroudi Parchin
HBHaleh Jahanbakhsh Basherlou
Haleh Jahanbakhsh Basherlou
Mohammad AlibakhshikenariMohammad Alibakhshikenari
Mohammad Alibakhshikenari
YPYasser Ojaroudi Parchin
Yasser Ojaroudi Parchin
Yasir Al-YasirYasir Al-Yasir
Yasir Al-Yasir
Ernesto LimitiErnesto Limiti
Ernesto Limiti
A design of mobile-phone antenna array with diamond-ring slot elements is proposed for fifth generation (5G) massive multiple-input/multiple-output (MIMO) systems. The configuration of the design consists of four double-fed diamond-ring slot antenna elements placed at different corners of the mobile-phone printed circuit board (PCB). A low-cost FR-4 dielectric with an overall dimension of 75 × 150 mm2 is used as the design substrate. The antenna elements are fed by 50-Ohm L-shaped microstrip-lines. Due to the orthogonal placement of microstrip feed lines, the diamond-ring slot elements can exhibit the polarization and radiation pattern diversity characteristic. A good impedance bandwidth (S11 ≤ −10 dB) of 3.2–4 GHz has been achieved for each antenna radiator. However, for S11 ≤ −6 dB, this value is 3–4.2 GHz. The proposed design provides the required radiation coverage of 5G smartphones. The performance of the proposed MIMO antenna design is examined using both simulation and experiment. High isolation, high efficiency and sufficient gain-level characteristics have been obtained for the proposed MIMO smartphone antenna. In addition, the calculated total active reflection coefficient (TARC) and envelope correlation coefficient (ECC) of the antenna elements are very low over the whole band of interest which verify the capability of the proposed multi-antenna systems for massive MIMO and diversity applications. Furthermore, the properties of the design in Data-mode/Talk-mode are investigated and presented.

4 February 2020 in Electronics
Verified
Journal Article
Open access
PDF file
Naser Ojaroudi ParchinNaser Ojaroudi Parchin
Naser Ojaroudi Parchin
HBHaleh Jahanbakhsh Basherlou
Haleh Jahanbakhsh Basherlou
Yasir Al-YasirYasir Al-Yasir
Yasir Al-Yasir
Ahmed M. AbdulkhaleqAhmed M. Abdulkhaleq
Ahmed M. Abdulkhaleq
MPMohammad Patwary
Mohammad Patwary
Raed Abd-AlhameedRaed Abd-Alhameed
Raed Abd-Alhameed
In this study, a new coplanar waveguide (CPW)-fed diversity antenna design is introduced for multiple-input–multiple-output (MIMO) smartphone applications. The diversity antenna is composed of a double-fed CPW-fed antenna with a pair of modified T-ring radiators. The antenna is designed to cover the frequency spectrum of commercial sub-6 GHz 5G communication (3.4–3.8 and 3.8–4.2 GHz). It also provides high isolation, better than −16 dB, without an additional decoupling structure. It offers good potential to be deployed in future smartphones. Therefore, the characteristics and performance of an 8-port 5G smartphone antenna were investigated using four pairs of the proposed diversity antennas. Due to the compact size and also the placement of the elements, the presented CPW-fed smartphone antenna array design occupies a very small part of the smartphone board. Its operation band spans from 3.4 to 4.4 GHz. The simulated results agree well with measured results, and the performance of the smartphone antenna design in the presence of a user is given in this paper as well. The proposed MIMO design provides not only sufficient radiation coverage supporting different sides of the mainboard but also polarization diversity.

22 April 2020 in Sensors
Verified
Journal Article
Open access
PDF file
Naser Ojaroudi ParchinNaser Ojaroudi Parchin
Naser Ojaroudi Parchin
HBHaleh Jahanbakhsh Basherlou
Haleh Jahanbakhsh Basherlou
Yasir Al-YasirYasir Al-Yasir
Yasir Al-Yasir
Ahmed M. AbdulkhaleqAhmed M. Abdulkhaleq
Ahmed M. Abdulkhaleq
Raed Abd-AlhameedRaed Abd-Alhameed
Raed Abd-Alhameed
A new ultra-wideband (UWB) multiple-input/multiple-output (MIMO) antenna system is proposed for future smartphones. The structure of the design comprises four identical pairs of compact microstrip-fed slot antennas with polarization diversity function that are placed symmetrically at different edge corners of the smartphone mainboard. Each antenna pair consists of an open-ended circular-ring slot radiator fed by two independently semi-arc-shaped microstrip-feeding lines exhibiting the polarization diversity characteristic. Therefore, in total, the proposed smartphone antenna design contains four horizontally-polarized and four vertically-polarized elements. The characteristics of the single-element dual-polarized UWB antenna and the proposed UWB-MIMO smartphone antenna are examined while using both experimental and simulated results. An impedance bandwidth of 2.5–10.2 GHz with 121% fractional bandwidth (FBW) is achieved for each element. However, for S11 ≤ −6 dB, this value is more than 130% (2.2–11 GHz). The proposed UWB-MIMO smartphone antenna system offers good isolation, dual-polarized function, full radiation coverage, and sufficient efficiency. Besides, the calculated diversity performances of the design in terms of the envelope correlation coefficient (ECC) and total active reflection coefficient (TARC) are very low over the entire operating band.