Lijin Cheng

Lijin Cheng


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 March 2018 in Journal of Advanced Ceramics
Verified
Journal Article
Open access
PDF file
JWJia-Min Wu
Jia-Min Wu
HXHuan Xiao
Huan Xiao
MLMeng-Yue Liu
Meng-Yue Liu
YCYing Chen
Ying Chen
YMYi-Xin Ma
Yi-Xin Ma
YSYu-Sheng Shi
Yu-Sheng Shi
In this paper, in-situ coagulation of 0.9Al2O3–0.1TiO2 suspension and microwave dielectric properties of 0.9Al2O3–0.1TiO2 ceramics prepared by a novel direct coagulation casting via high valence counter ions (DCC-HVCI) method were proposed. The 0.9Al2O3–0.1TiO2 suspension could be coagulated via controlled release of calcium ions from calcium iodate at an elevated temperature. The influence of tri-ammonium citrate (TAC) content, solid loading, and calcium iodate content on the rheological properties of the suspension was investigated. In addition, the influence of coagulation temperature on coagulation time and properties of green bodies was also studied. It was found that the stable 0.9Al2O3–0.1TiO2 suspension could be successfully prepared by adding 0.3 wt% TAC and adjusting pH value to 10–12 at room temperature. 0.9Al2O3–0.1TiO2 green bodies with uniform microstructures were coagulated by adding 8.0 g/L calcium iodate after treating at 70 °C for 1 h. 0.9Al2O3–0.1TiO2 ceramics, sintered at 1500 for 4 h and annealed at 1100°C for 5 h, showed °Cuniform microstructures with density of 3.62±0.02 g/cm3. The microwave dielectric properties of 0.9Al2O3–0.1TiO2 ceramics prepared by DCC-HVCI method were: εr = 11.26±0.06, Q×f = 11569±629 GHz, τ f = 0.93±0.60 ppm/°C. The DCC-HVCI method is a novel and promising route without binder removal process to prepare complex-shaped microwave dielectric ceramics with uniform microstructures and good microwave dielectric properties.

20 February 2019 in Materials
Verified
Journal Article
Open access
PDF file
FLFei Liu
Fei Liu
SLShaojun Liu
Shaojun Liu
XCXuejiao Cui
Xuejiao Cui
LCLijin Cheng
Lijin Cheng
HLHao Li
Hao Li
WRWeidong Rao
Weidong Rao
The degree of Zn2+ and Ta5+ ions ordering could play an important role in the dielectric loss in Ba(Zn1/3Ta2/3)O3 (BZT) ceramics. However, the influence of the grain size of Ba(B′1/3B″2/3)O3 ceramics with nano or sub-micron grains on the ordering domains structure is still not clear. In the present paper, highly dense (~98%) BZT microwave dielectric ceramics with homogeneous sub-micron structure (~330 nm) were prepared through spark plasma sintering (SPS). High resolution transmission electron microscopy combined with X-ray diffraction (XRD)clearly showed that the B-site ordering structure of sintered BZT samples by SPS becomes the B-site long-range 1:2 ordering as annealing proceeds. In contrast, the short-range 1:2 ordering in non-annealed counterparts was also present, which was not detectable by XRD. The size of B-site ordering domains enlarged with annealing temperature. The sub-micron structure of sintered BZT ceramics by SPS remained stable at up to 1400 C; however, the size of B-site 1:2 ordering domain was more than five times larger, which led to a significant increase of the quality factor (Q·f) to 37,700 GHz from 15,000 GHz.