Recent developments in optical biosensors based on integrated photonic devices are reviewed with a special emphasis on silicon-on-insulator ring resonators. The review is mainly devoted to the following aspects: (1) Principles of sensing mechanism, (2) sensor design, (3) biofunctionalization procedures for specific molecule detection and (4) system integration and measurement set-ups. The inherent challenges of implementing photonics-based biosensors to meet specific requirements of applications in medicine, food analysis, and environmental monitoring are discussed.

A novel waveguide-coupled germanium p-i-n photodiode is demonstrated which combines high responsivity with very high −3 dB bandwidth at a medium dark current. Bandwidth values are 40 GHz at zero bias and more than 70 GHz at −1 V. Responsivity at 1.55 µm wavelength ranges from 0.84 A/W at zero bias to 1 A/W at −1 V. Room temperature dark current density at −1 V is about 1 A/cm². The high responsivity mainly results from the use of a new, low-loss contact scheme, which moreover also reduces the negative effect of photo carrier diffusion on bandwidth.

A 0.13 μm SiGe BiCMOS technology for millimeter-wave applications is presented. This technology features high-speed HBTs with peak transit frequencies f _T of 240 GHz, maximum oscillation frequencies f _max of 330 GHz, and breakdown voltages BV _CEO of 1.7 V along with high-voltage HBTs ( f _T = 50 GHz, f _max = 130 GHz, BV _CEO = 3.7 V) integrated in a dual gate oxide RF-CMOS process. Ring oscillator gate delays of 2.9 ps, low-noise amplifiers for 122 GHz, and LC oscillators with fundamental-mode oscillation frequencies above 200 GHz are demonstrated.

Silicon photonic micro-ring resonators (MRR) developed on the silicon-on-insulator (SOI) platform, owing to their high sensitivity and small footprint, show great potential for many chemical and biological sensing applications such as label-free detection in environmental monitoring, biomedical engineering, and food analysis. In this tutorial, we provide the theoretical background and give design guidelines for SOI-based MRR as well as examples of surface functionalization procedures for label-free detection of molecules. After introducing the advantages and perspectives of MRR, fundamentals of MRR are described in detail, followed by an introduction to the fabrication methods, which are based on a complementary metal-oxide semiconductor (CMOS) technology. Optimization of MRR for chemical and biological sensing is provided, with special emphasis on the optimization of waveguide geometry. At this point, the difference between chemical bulk sensing and label-free surface sensing is explained, and definitions like waveguide sensitivity, ring sensitivity, overall sensitivity as well as the limit of detection (LoD) of MRR are introduced. Further, we show and explain chemical bulk sensing of sodium chloride (NaCl) in water and provide a recipe for label-free surface sensing.

Label-free direct-optical biosensors such as surface-plasmon resonance (SPR) spectroscopy has become a gold standard in biochemical analytics in centralized laboratories. Biosensors based on photonic integrated circuits (PIC) are based on the same physical sensing mechanism: evanescent field sensing. PIC-based biosensors can play an important role in healthcare, especially for point-of-care diagnostics, if challenges for a transfer from research laboratory to industrial applications can be overcome. Research is at this threshold, which presents a great opportunity for innovative on-site analyses in the health and environmental sectors. A deeper understanding of the innovative PIC technology is possible by comparing it with the well-established SPR spectroscopy. In this work, we shortly introduce both technologies and reveal similarities and differences. Further, we review some latest advances and compare both technologies in terms of surface functionalization and sensor performance.