Considering the cross effect in the evolution of subsequent yield surfaces for metals, an anisotropic distortional yield surface constitutive model is developed. By introducing an anisotropic distortional hardening function into the isotropic hardening part of the classical Chaboche rate-dependent constitutive model, the plastic-deformation-induced distortional and anisotropic hardening behaviors of subsequent yield surfaces are characterized. The experimental data of distortional yield surfaces for T2 pure copper under three different loading paths, including pre-tension, pre-torsion, and pre-tension-torsion proportional loading of 45-degree, are simulated by implementing the models into a numerical user defined material (UMAT) procedure based on the ABAQUS finite element package. To validate the anisotropic plastic model, the simulated yield surfaces are compared with experimental observations and predicted results for a crystal plasticity model and good agreement are noted. The simulations demonstrate that the proposed model can accurately capture the characteristics of the distortional yield surface and the anisotropic hardening process of the yield surface. Moreover, the distortional shapes of experimental subsequent yield surfaces in loading direction and opposite direction can be better revealed by the anisotropic plastic constitutive model than the crystal plastic constitutive model.
13 November 2023 in Construction and Building Materials
The subsequent anisotropic yield behavior of 45 steel was predicted by the distortional yield surface constitutive model, which can describe the anisotropic subsequent yield and the cross effect of metal associating with loading history. The yield characteristics and plastic hardening behaviors of the 45 steel were simulated under three preloading paths including pre-torsion, pre-tension, and pre-tension–torsion. Based on the comparison between the experimental yield stresses and the simulation by the classical Chaboche model, the proposed model can describe the remarkable anisotropic yield behavior related to the loading history, which can effectively describe the sharp point of yield surface in pre-loading direction and the smaller curvature near its opposite direction. It was successfully simulated by the constitutive model proposed that the subsequent distortional yield surface defined by small offset strain and the degradation process of the distortion feature defined by large offset strain.