This paper develops and characterizes a 3D nanofabrication process using ultrasonic vibration assisted nanomachining based on an atomic force microscope (AFM). The superiorities of height control over force control in the process are explained and are demonstrated by fabrication results. Three factors impacting actual feature depths are investigated, including the ultrasonic z-vibrational amplitude, the assigned base feature depth, and the machining speed. 3D nanostructures with continuous height variations were successfully fabricated on PMMA films with the feature height manipulated through controlling the absolute height of the cantilever tip in AFM. By selecting machining parameters based on characterizations, feature dimensions can be controlled as desired values within small variances. The capability of transferring 3D nanostructures from PMMA films to silicon substrates is further explored in this paper. After selecting recipes of the reactive ion etching (RIE) process, 3D nanostructures are successfully transferred to silicon substrates with controllable selectivity. The reported ultrasonic vibration assisted nanomachining process in height control provides a robust approach of fabricating 3D nanostructures.
Continuum mechanics break down in bending stiffness calculations of mono- and few-layered two-dimensional (2D) van der Waals crystal sheets, because their layered atomistic structures are uniquely characterized by strong in-plane bonding coupled with weak interlayer interactions. Here, we elucidate how the bending rigidities of pristine mono- and few-layered molybdenum disulfide (MoS2), graphene, and hexagonal boron nitride (hBN) are governed by their structural geometry and intra- and inter-layer bonding interactions. Atomic force microscopy experiments on the self-folded conformations of these 2D materials on flat substrates show that the bending rigidity of MoS2 significantly exceeds those of graphene or hBN of comparable layers, despite its much lower tensile modulus. Even on a per-thickness basis, MoS2 is found to possess similar bending stiffness to hBN and is much stiffer than graphene. Density functional theory calculations suggest that this high bending rigidity of MoS2 is due to its large interlayer thickness and strong interlayer shear, which prevail over its weak in-plane bonding.
1 December 2021 in Journal of Pharmaceutical Sciences