Remote-sensing for oil spills is reviewed. The use of visible techniques is ubiquitous, however it gives only the same results as visual monitoring. Oil has no particular spectral features that would allow for identification among the many possible background interferences. Cameras are only useful to provide documentation. In daytime oil absorbs light and remits this as thermal energy at temperatures 3-8K above ambient, this is detectable by infrared (IR) cameras. Laser fluorosensors are useful instruments because of their unique capability to identify oil on backgrounds that include water, soil, weeds, ice and snow. They are the only sensor that can positively discriminate oil on most backgrounds. Radar detects oil on water by the fact that oil will dampen water-surface capillary waves under low to moderate wave/wind conditions. Radar offers the only potential for large area searches, day/night and foul weather remote sensing.

The technical aspects of oil spill remote sensing are examined and the practical uses and drawbacks of each technology are given with a focus on unfolding technology. The use of visible techniques is ubiquitous, but limited to certain observational conditions and simple applications. Infrared cameras offer some potential as oil spill sensors but have several limitations. Both techniques, although limited in capability, are widely used because of their increasing economy. The laser fluorosensor uniquely detects oil on substrates that include shoreline, water, soil, plants, ice, and snow. New commercial units have come out in the last few years. Radar detects calm areas on water and thus oil on water, because oil will reduce capillary waves on a water surface given moderate winds. Radar provides a unique option for wide area surveillance, all day or night and rainy/cloudy weather. Satellite-carried radars with their frequent overpass and high spatial resolution make these day–night and all-weather sensors essential for delineating both large spills and monitoring ship and platform oil discharges. Most strategic oil spill mapping is now being carried out using radar. Slick thickness measurements have been sought for many years. The operative technique at this time is the passive microwave. New techniques for calibration and verification have made these instruments more reliable.

The response to a major oil spill can be challenging in temperate climates and with good weather conditions. By contrast, a major spill in or under ice and snow, presents a whole new series of challenges. This paper reviews detection technologies for these challenging situations. A number of acoustic techniques have been tried in test tank situations and it was found that acoustic detection of oil was possible because oil behaves as a solid in acoustic terms and transmits shear waves. Laboratory tests have been carried out and a prototype was built and tested in the field. Radio frequency methods, such as ground penetrating radar (GPR), have been tested for both oil-under-ice and oil-under-snow. The GPR method does not provide sufficient discrimination for positive oil detection in actual spills. Preliminary tests on the use of Nuclear Magnetic Resonance for detecting oil, in and under ice, shows promise and further work on this is being done at this time. A number of other oil-in-ice detection technologies have been tried and evaluated, including standard acoustic thickness probes, fluorosensor techniques, and augmented infrared detection. Each of these showed potential in theory during tank tests. Further testing on these proposed methods is required.