The 2004 Indian Ocean tsunami caused massive morphological changes around the coast of Sumatra, Indonesia. This research investigates the coastal morphological changes in the Banda Aceh area via coupling a hydrodynamic model with a sediment transport module. The Cornell Multigrid Coupled Tsunami Model (COMCOT) was coupled with the XBeach Model to simultaneously simulate sediment transport and the hydrodynamic process during the tsunami. The coupled model is known as COMCOT-SED. Field bathymetric data measured in 2006 were used to validate the coupled model. This study reveals that the tsunami’s impact was more severe on the eastern part of the coast, where it hit directly. Meanwhile, the western part of the coast suffered a lower impact because of the sheltering effects from a series of small islands and a headland to the north. This study has shown that the model results from COMCOT-SED are consistent with field data and show where the tsunami waves caused offshore erosion.
21 October 2016 in Journal of Coastal Conservation
Numerical simulation is one of the useful tools to analyze natural phenomena in the earth such as the tsunami disaster. Several numerical models can simulate the tsunami wave from its generation, propagation, and inundation. However, most tsunami models do not include the sediment transport module. The tsunami wave actually induces a lot of sediment during the propagation in the coastal area. In the case of Indian Ocean Tsunami in 2004, massive morphological changes were caused by the tsunami waves around Sumatra coast. In Aceh, some areas eroded by the tsunami wave were living place for a local community. It is indispensable for the resident in the coastal area to estimate the risk of morphological changes due to a tsunami wave. Therefore, a model that can investigate the morphological changes due tsunami wave is necessary. The result of this model can be used to consider a countermeasure for tsunami wave impact in the coastal area, such as land-use management and planning. The COMCOT-SED model had been developed by several researchers. This model combines the hydrodynamic module and the sediment module. The aim of this study is to get general information about performance of the COMCOT-SED model and to modify the model for more accurate results. Firstly, the model was demonstrated in the ideal condition to confirm the model validity. Then, we evaluated the model performance comparing the model results and the laboratory experiment data which was conducted by other researcher. The authors found that the results of water level and bottom profile by the original model in the ideal condition are not suitable. The model modification will give us more suitable results. The modified model will be applied to simulate the tsunami wave and sediment transport in the small area.
Indonesia is located on 3 main plates of the world, so it is known as the ring of fire area because of the potential for volcanic eruptions and earthquakes. This study aims to determine the analysis of the probability of the occurrence of tsunami waves generated on the coast of the Jakarta area. The research process was carried out by simulating tsunami waves using the Cornel Multigrid Coupled Tsunami (COMCOT) program and numerical modeling Shallow Water Equation (SWE). The results of this study are the probability obtained based on PTHA calculations with the largest percentage at the 7th location point for the 2000 years return period, namely 42.01% and 1.55% for the possibility of occurring with 0.5 meters and 3 meters, potential height The tsunami that reached the Jakarta area was 1.24 meters in the Muara Angke area. This uneven distribution was continued to create 7 points near the coast of Jakarta which have strategic areas with the results of location point 1 until 7, namely 1, 04 m; 1.12 m; 1.12 m; 1.19 m; 1.31 m; 1.48 m; and 1.78 m and the furthest distance reached by the tsunami was 32.4 meters in the Muara Angke area.
1 November 2023 in Ecological Engineering & Environmental Technology
This research explores the viability of converting discarded PET plastic waste into a valuable resource through the implementation of pyrolysis and refuse-derived fuel (RDF) technologies. The objective is to assess the potential of Polyethylene Terephthalate (PET) charcoal waste as an efficient...