We performed nonequilibrium molecular dynamics (NEMD) simulations and solvent permeation experiments to unravel the mechanism of water transport in reverse osmosis (RO) membranes. The NEMD simulations reveal that water transport is driven by a pressure gradient within the membranes, not by a water concentration gradient, in marked contrast to the classic solution-diffusion model. We further show that water molecules travel as clusters through a network of pores that are transiently connected. Permeation experiments with water and organic solvents using polyamide and cellulose triacetate RO membranes showed that solvent permeance depends on the membrane pore size, kinetic diameter of solvent molecules, and solvent viscosity. This observation is not consistent with the solution-diffusion model, where permeance depends on the solvent solubility. Motivated by these observations, we demonstrate that the solution-friction model, in which transport is driven by a pressure gradient, can describe water and solvent transport in RO membranes.
In situ chemical cleaning with sodium hypochlorite (NaClO) is frequently employed to maintain a constant permeability in membrane bioreactor (MBR) systems. In this study, the effects of NaClO shock on MBR performance under continuous operating conditions were investigated. A lab-scale MBR was operated for three runs with in situ chemical cleaning. Experimental results demonstrate an obvious increase of the membrane fouling rate (13.7, 23.5 and 23.3 kPa d−1) on day 1 of cleaning, followed by a rapid reduction (6.4, −0.2 and 3.5 kPa d−1) on day 2 of cleaning. This indicates the rapid self-recovery ability of the NaClO-shocked sludge. Furthermore, as the operating time increased, the sludge extracellular polymeric substance (EPS) content initially increased, followed by a subsequent decrease, with the gradual improvement of sludge filterability that consequently reduced membrane fouling. Thermodynamic analysis revealed that the shocked-sludge surface properties, including the surface electron donor component (γ−), hydrophobicity, adhesive energy and self-cohesive ability, were gradually restored to the raw sludge level, which reduced the membrane fouling potential.