A new type of tactile sensor using pressure-conductive rubber with stitched electrical wires is presented. The sensor is thin and flexible and can cover three-dimensional objects. Since the sensor adopts a single-layer composite structure, the sensor is durable with respect to external force. In order to verify the effectiveness of this tactile sensor, we performed an experiment in which a four-fingered robot hand equipped with tactile sensors grasped sphere and column. The sensor structure, electrical circuit, and characteristics are described. The sensor control system and experimental results are also described.

In this paper we introduce a newly developed high-speed multi-fingered robotic hand. The hand has 8-joints and 3-fingers. A newly developed small harmonic drive gear and a high-power mini actuator are fitted in each finger link, and a strain gauge sensor is in each joint. The weight of the hand module is only 0.8 kg, but high-speed motion and high-power grasping are possible. The hand can close its joints at 180 deg per 0.1 s, and the fingertips have an output force of about 28 N. The hand system is controlled by a massively parallel vision system. Experimental results are shown in which a falling object was caught by the high-speed hand.

As the scale of the power grid continues to expand, the human-based inspection method struggles to meet the needs of efficient grid operation and maintenance. Currently, the existing UAV inspection system in the market generally has short endurance power time, high flight operation requirements, low degree of autonomous flight, low accuracy of intelligent identification, slow generation of inspection reports, and other problems. In view of these shortcomings, this paper designs an intelligent inspection system based on self-developed UAVs, including autonomous planning of inspection paths, sliding film control algorithms, mobile inspection schemes and intelligent fault diagnosis. In the first stage, basic data such as latitude, longitude, altitude, and the length of the cross-arms are obtained from the cloud database of the power grid, while the lateral displacement and vertical displacement during the inspection drone operation are calculated, and the inspection flight path is generated independently according to the inspection type. In the second stage, in order to make the UAV’s flight more stable, the reference-model-based sliding mode control algorithm is introduced to improve the control performance. Meanwhile, during flight, the intelligent UAV uploads the captured photos to the cloud in real time. In the third stage, a mobile inspection program is designed in order to improve the inspection efficiency. The transfer of equipment is realized in the process of UAV inspection. Finally, to improve the detection accuracy, a high-precision object detector is designed based on the YOLOX network model, and the improved model increased the $mA{P}_{0.5:0.95}$ metric by 2.22 percentage points compared to the original YOLOX_m for bird’s nest detection. After a large number of flight verifications, the inspection system designed in this paper greatly improves the efficiency of power inspection, shortens the inspection cycle, reduces the investment cost of inspection manpower and material resources, and successfully fuses the object detection algorithm in the field of high-voltage power transmission lines inspection.

In most previous studies, it has been difficult for a robot hand to regrasp a target quickly because its motion was static or quasi-static, in a constant contact state. In order to achieve high-speed regrasping, we propose a new strategy which we call dynamic regrasping. In this strategy, the regrasping task is achieved by throwing a target up and by catching it. In this paper, a regrasping strategy based on visual feedback is presented and experimental results using a high-speed multifingered robot hand and a high-speed vision system are shown. A cylinder is chosen as a specific example of target for dynamic regrasping, with which successful dynamic regrasping tasks are experimentally achieved

In this paper a robotic batting algorithm using a high-speed arm and high-speed stereo vision is proposed. With this strategy, the desired trajectory of the manipulator is generated so that both high-speed swing motion and tracking motion combine to meet the ball squarely with the bat. As a result the manipulator can follow the ball while swinging the bat at high speed even if it is difficult to predict the trajectory of a ball. Experimental results are shown in which a high-speed manipulator hits a ball thrown by a human.

In this paper the robotic throwing task is considered with the goal of achieving high-speed dynamic manipulation. We propose a kinetic chain approach for swing motion focused on torque transmission. In addition the release method using a robotic hand is analyzed for ball control. Experimental results are shown in which a high-speed manipulator throws a ball toward a target.