Health monitoring and early fault detection of wind turbines have attracted considerable attention due to the benefits of improving reliability and reducing the operation and maintenance costs of the turbine. However, dynamic and constantly changing operating conditions of wind turbines still pose great challenges to effective and reliable fault detection. Most existing health monitoring approaches mainly focus on one single operating condition, so these methods cannot assess the health status of turbines accurately, leading to unsatisfactory detection performance. To this end, this paper proposes a novel general health monitoring framework for wind turbines based on supervisory control and data acquisition (SCADA) data. A key feature of the proposed framework is that it first partitions the turbine operation into multiple sub-operation conditions by the clustering approach and then builds a normal turbine behavior model for each sub-operation condition. For normal behavior modeling, an optimized deep belief network is proposed. This optimized modeling method can capture the sophisticated nonlinear correlations among different monitoring variables, which is helpful to enhance the prediction performance. A case study of main bearing fault detection using real SCADA data is used to validate the proposed approach, which demonstrates its effectiveness and advantages.

On the basis of the current theoretical understanding of boron-based hard superconductors under ambient conditions, numerous studies have been conducted with the aim of developing superconducting materials with favorable mechanical properties using boron-rich compounds. In this paper, first-principles calculations reveal the existence of an unprecedented family of tetragonal pentaborides MB5 (M = Na, K, Rb, Ca, Sr, Ba, Sc, and Y), comprising B20 cages and centered metal atoms acting as stabilizers and electron donors to the boron sublattice. These compounds exhibit both superconductivity and high hardness, with the maximum superconducting transition temperature Tc of 18.6 K being achieved in RbB5 and the peak Vickers hardness Hv of 35.1 GPa being achieved in KB5 at 1 atm. The combination of these properties is particularly evident in KB5, RbB5, and BaB5, with Tc values of ∼14.7, 18.6, and 16.3 K and Hv values of ∼35.1, 32.4, and 33.8 GPa, respectively. The results presented here reveal that pentaborides can provide a framework for exploring and designing novel superconducting materials with favorable hardness at achievable pressures and even under ambient conditions.

Sensor fault detection of wind turbines plays an important role in improving the reliability and stable operation of turbines. The supervisory control and data acquisition (SCADA) system of a wind turbine provides promising insights into sensor fault detection due to the accessibility of the data and the abundance of sensor information. However, SCADA data are essentially multivariate time series with inherent spatio-temporal correlation characteristics, which has not been well considered in the existing wind turbine fault detection research. This paper proposes a novel classification-based fault detection method for wind turbine sensors. To better capture the spatio-temporal characteristics hidden in SCADA data, a multiscale spatio-temporal convolutional deep belief network (MSTCDBN) was developed to perform feature learning and classification to fulfill the sensor fault detection. A major superiority of the proposed method is that it can not only learn the spatial correlation information between several different variables but also capture the temporal characteristics of each variable. Furthermore, this method with multiscale learning capability can excavate interactive characteristics between variables at different scales of filters. A generic wind turbine benchmark model was used to evaluate the proposed approach. The comparative results demonstrate that the proposed method can significantly enhance the fault detection performance.

Health monitoring of wind turbine gearboxes has gained considerable attention as wind turbines become larger in size and move to more inaccessible locations. To improve the reliability, extend the lifetime of the turbines, and reduce the operation and maintenance cost caused by the gearbox faults, data-driven condition motoring techniques have been widely investigated, where various sensor monitoring data (such as power, temperature, and pressure, etc.) have been modeled and analyzed. However, wind turbines often work in complex and dynamic operating conditions, such as variable speeds and loads, thus the traditional static monitoring method relying on a certain fixed threshold will lead to unsatisfactory monitoring performance, typically high false alarms and missed detections. To address this issue, this paper proposes a reliable monitoring model for wind turbine gearboxes based on echo state network (ESN) modeling and the dynamic threshold scheme, with a focus on supervisory control and data acquisition (SCADA) vibration data. The aim of the proposed approach is to build the turbine normal behavior model only using normal SCADA vibration data, and then to analyze the unseen SCADA vibration data to detect potential faults based on the model residual evaluation and the dynamic threshold setting. To better capture temporal information inherent in monitored sensor data, the echo state network (ESN) is used to model the complex vibration data due to its simple and fast training ability and powerful learning capability. Additionally, a dynamic threshold monitoring scheme with a sliding window technique is designed to determine dynamic control limits to address the issue of the low detection accuracy and poor adaptability caused by the traditional static monitoring methods. The effectiveness of the proposed monitoring method is verified using the collected SCADA vibration data from a wind farm located at Inner Mongolia in China. The results demonstrated that the proposed method can achieve improved detection accuracy and reliability compared with the traditional static threshold monitoring method.

Condition monitoring of wind turbines is critical for increasing the reliability of the turbines and reducing their operation and maintenance costs. Supervisory control and data acquisition (SCADA) systems have been widely regarded as a promising technique to monitor the health status of turbines due to their abundance and cost-effective operation data. However, SCADA data are fundamentally multivariate time series with inherent spatio-temporal correlations. Therefore, it is still difficult to extract such correlations and then accurately identify the health status. This paper proposes a novel multi-view spatio-temporal feature fusion approach (MVSTCNN) based on convolutional neural networks (CNN) for condition monitoring of wind turbines. Specifically, multiple CNN modules with convolutional kernels of varying sizes are designed to extract correlations among several sensor variables and the temporal dependency concealed in each variable in parallel. A main advantage of the proposed method is its capacity to capture multiscale local information and global information simultaneously in both temporal and spatial dimensions, which improves the performance of condition monitoring. Real SCADA data from a wind farm is utilized to evaluate the effectiveness and superiority of the proposed approach. The result demonstrates that the proposed approach is effective for early fault detection in wind turbines.