Ferrofluids, a distinctive class of nanofluid, consists of suspension of magnetic nanoparticles in a nonmagnetic base fluid. Flow and heat transport properties of such a fluid can be manipulated when subjected to external magnetic field and temperature gradient. This unique feature has fascinated researchers across the globe to test its capability as a coolant for miniature electronic devices. The proposed work presents an updated and comprehensive review on ferrofluids with emphasis on heat transfer enhancement of microdevices. Based on the research findings, a number of important variables that have direct bearing on convective heat transport ability of ferrofluid have been recognized. The paper also identifies the key research challenges and opportunities for future research. By critically resolving these challenges, it is anticipated that ferrofluids can make substantial impact as coolant in miniature heat exchangers.
The World Health Organization (WHO) declared in May 2021 that SARS-CoV-2 is transmitted not only by close contact with infectious respiratory fluids from infected people or contaminated materials but also indirectly through air. Airborne transmission has serious implications for the control measures we can deploy, given the emergence of more transmissible variants. This emphasizes the need to deploy a mechanism to reduce the viral load in the air, especially in closed and crowded places such as hospitals, public transport buses, etc. In this study, we explored ultraviolet C (UVC) radiation for its ability to inactivate the SARS-CoV-2 particles present in aerosols and designed an air disinfection system to eliminate infectious viruses. We studied the virus inactivation kinetics to identify the UVC dosage required to achieve maximum virus inactivation. Based on the experimental data, UVC-based devices were designed for the sanitization of air through HVAC systems in closed spaces. Further, a risk assessment model to estimate the risk reduction was applied which showed that the use of UVC radiation could result in the reduction of the risk of infection in occupied spaces by up to 90%.
Daylighting using natural illumination system (NILS) is gaining popularity due to transition to the renewable and non-conventional energy resources. In the proposed work, optomechanical design, numerical analysis, experimentation and integration of a modular Fresnel lens for NILS to effectively harness the sunlight is discussed. The modular and integrated design delivers uniform light at the receiving area of the daylight transportation system. This modular Fresnel lens is a combination of linear Fresnel lenses designed to offer a moderate concentration ratio to avoid hot spots. The distribution of solar radiation on the focal plane/entry section of the plastic optical fibre bundle (daylight transportation system) is simulated using the ray-trace technique for a lens system with a concentration ratio of 81. The irradiance distributions at the focal plane were found uniform with a radiometric and photometric transmission efficiency of 72.45% and 85.96%, respectively, for the lens element. The overall photometric transmission efficiency of the system with 10 m long plastic/acrylic optical fibre cable was found as 40.97%.