Formation of domain structure by electron beam irradiation in congruent lithium niobate covered by surface dielectric layer with planar and channel waveguides produced by Soft Proton Exchange (SPE) process has been studied. Formation of domains with arbitrary shapes as a result of discrete switching has been revealed. The fact was attributed to ineffective screening of depolarization field in the crystals with a surface layer modified by SPE process. The dependences of the domain sizes on the dose and the distance between irradiated areas have been revealed. Finally, we have demonstrated that electron beam irradiation of lithium niobate crystals with surface resist layer can produce high quality periodical domain patterns after channel waveguide fabrication. Second harmonic generation with normalized nonlinear conversion efficiency up to 48%/(W cm2) has been achieved in such waveguides.
We experimentally compared the shapes and sizes of isolated domains created by the focused ion beam irradiation in the lithium niobate crystals doped by MgO with polar surface covered by dielectric (resist) layer and those with free surface. We attributed the larger sizes of isolated domains in the samples covered by the resist layer to ion localization in the resist. We revealed a change in the domain shape as a function of increasing dose and explained it in terms of kinetic approach taking into account the modification of the surface layers by ion irradiation. We applied the obtained knowledge for 1D and 2D periodical poling using ion beam. Finally, we created the 2D square 1-μm-period array of isolated domains with radius about 300 nm and maximal depth of all domains in the array up to 100 μm as well as the 1D pattern of through stripe domains with 2-μm-period in 1-mm-thick wafer.
We demonstrate the application of confocal Raman microscopy (CRM) for nondestructive imaging of ferroelectric domains both at the surface and in the bulk of lead magnesium niobate-lead titanate (PMN-PT) ferroelectric single crystals. The studied model periodical domain structure was created at a [001] cut of tetragonal-phase PMN-PT crystal by the electron beam patterning technique. It was shown that the surface CRM domain image coincides in details with the image obtained by piezoresponse force microscopy.
24 January 2018 in Journal of the Optical Society of America B
Depending on the chosen fabrication process, nonlinear waveguides realized in periodically oriented material such as periodically poled lithium niobate (PPLN) can present different fabrication errors. In this paper, we present a detailed numerical study of the impact on the nonlinear performances of one or several stitching errors occurring during the realization of the periodic domains by e-beam writing. This study shows that contrary to what was expected, a single finite stitching error does not simply decrease the nonlinear efficiency but splits the second harmonic (SH) signal into a double peak spectrum, where the position of the peaks and their width at half-maximum depend not only on the poling period, the total length of the grating, and the waveguide parameters, but also on the amplitude and the position of the defect. The numerical results are confirmed by second harmonic generation (SHG) experiments performed in PPLN waveguides obtained by Soft Proton Exchange and where the nonlinear grating was composed of one to four e-beam-written 1.5-mm-long PPLN sections between which important stitching errors can occur. In this case the spectrum can be quite complicated. It is worth noting that similar errors (domains merging or missing domains) can occur also in the e-field poling process but they are randomly distributed along the propagation path. Therefore, this study is a first attempt to take them into account to explain experimental results and indicate the steps that have to be taken to improve the quality of the components.
We present the results of experimental study of the local switching in single crystals of relaxor ferroelectric Ni-doped strontium barium niobate with various initial domain states using conductive tip of scanning probe microscope. We investigated the domain growth in as-grown domain structure and initial domain states created by: (i) scanning by biased tip, (ii) in-field cooling, and (iii) scanning by electron beam. The dependences of effective domain radius on the voltage and pulse duration were derived. The shape factor, domain wall mobility, and start voltage were revealed. The obtained results can be used for the domain engineering in ferroelectrics.
Ferroelectric domain structure has been formed under the action of electron beam scanning in congruent lithium niobate single crystal covered by surface dielectric layer. The obtained types of the domain patterns have been considered as subsequent stages of domain structure evolution. The dependence on irradiated charge density of domain density, length, and period of domain rays and stripe domain width was used for characterization of the domain structure evolution. The threshold irradiated charge density necessary for the formation of solid stripe domain has been revealed. All obtained results have been discussed in terms of kinetic approach based on the analogy between domain structure evolution and first-order phase transition.