The increasing attention toward environmental aspects has led, also in the sector of construction materials, to the need for developing more eco-friendly solutions. Among several options, the employment of low energy raw materials appears as an efficient solution intended to enhance the sustainability of building structures. One of the applications moving in this direction is the use of plant fibers as a reinforcement in cement-based composites, hence named as natural textile reinforced mortar (NTRM) composites. Although representing a promising technique, there are still several open issues concerning the variability of plant fibers properties, the durability, and the mechanical compatibility with the mortar. This study aims at investigating the influence of an impregnation process on the thread’s morphology and on the mechanical response. Therefore, the geometry of dry and impregnated flax threads is identified by using scanning electron microscope (SEM) images analysis, and their mechanical response in tension is assessed. In addition, the fibers-to-mortar bond behavior is investigated by means of pull-out tests. The proposed results show that the impregnation procedure employed, although not improving the fibers-to matrix bond, leads to a standardisation of the threads morphology and reduces the thread’s deformability in tension, and paves the way for further investigations on a larger scale.

Textile Reinforced Mortar (TRM) composite systems are gaining consensus within the scientific and technical communities as a viable and advantageous alternative to the most conventional Fibre-Reinforced Polymer (FRP) composites. Due to the good compatibility both in terms of stiffness and vapor permeability between the inorganic matrix and the substrate, the TRMs appear to be particularly well suited for strengthening masonry members and enhancing their capacity to withstand tensile and shear stresses, such as those induced by seismic shakings. This paper aims to investigate the mechanical response of a TRM system featuring an internal reinforcement made of basalt fiber textile. Therefore, the paper reports the results of an experimental campaign carried out by single-lap shear bond tests on masonry substrate reinforced by TRM strips. Three different kinds of TRM have been taken into account, each one characterized by a variable number of fabric plies. The results show that, in all cases, TRMs fail prematurely due to debonding between fabric and matrix. However, the aforementioned premature failure is the main concern emerging from these test results, and further work is requested in reformulating the matrix composition towards enhancing their tensile strength and, hence, restraining the occurrence of fabric-to-matrix debonding.

In recent years, the use of plant fibres in Textile-Reinforced Mortar (TRM) composites emerged as a valuable solution to increase their sustainability. Several studies carried out to mechanically characterize the so-called Natural TRMs, although showing promising results, also emphasised some drawbacks due to a severe deformability of the system and to durability issues. This study aims at improving the mechanical behaviour of Natural TRMs including impregnated flax textile (Flax TRMs) by the addition of short curauá fibres within the matrix. Flax TRM specimens were tested in tension to assess the influence of the fibre-reinforced mortar on the composite response. The crack pattern developed during the test was investigated via Digital Image Correlation analysis and by means of an analytical simplified model proposed by the authors. The addition of curauá fibres resulted in a denser crack pattern and in a significant decrease of the mean crack width (around 20%). The overall tensile response of Flax TRMs including curauá fibres resulted closer to the ideal three-linear behaviour of strain-hardening TRM composites with respect to the conventional Flax TRMs by also presenting an increase of dissipated energy of around 45%. This study paves the way for further analysis aimed at enhancing the mechanical performance of Natural TRMs adopting sustainable improvement techniques.

Existing buildings are often in need of strengthening interventions, and several technical solutions have been recently developed for this purpose. Among them, the use of textile-reinforced mortar (TRM) composites has gained consensus as a technically viable and economically convenient option. Moreover, TRM has the potential to be employed as a reversible and sustainable strengthening technique for masonry buildings. In this context, the present paper aims to investigate the mechanical properties of TRM systems consisting of sustainable phases, such as lime-based matrices and natural fabrics produced by waiving fibers obtained from plants, such as Jute or Flax. This class composite system can be referred to as natural TRM and is denoted by the acronym NTRM. The present study moves from the geometric and mechanical characterisation of fibres and fabrics and, after having also investigated the properties of the mortar, it reports the results of tensile tests carried out on specimens of the NTRM systems under consideration, with the main aim of providing the empirical bases of the relationships between the geometric and physical properties of the constituents and the resulting mechanical response of the composite system. The obtained results show that the considered Flax-TRM system has an apparent composite behavior, as its response to tension is clearly characterised by the well-known three stages corresponding to the elastic response, the formation of cracks, and the reinforcement response up to rupture. Conversely, the Jute-TRM system needs to be further improved in terms of balance between the properties of the matrix and the internal reinforcement. Further studies will be devoted to this specific aspect and, more generally, to investigating the relationships between constituents’ properties and the NTRM behavior.