Abdullah Akbulut

Dr. Abdullah Akbulut


Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 June 2009 in International Journal of Energy Research
Verified
Journal Article
Closed access
PDF file
AAAbdullah Akbulut
Abdullah Akbulut
ADAydin Durmuş
Aydin Durmuş
In this study, drying parameters of mulberry grown in Elazıǧ were investigated as experimental and theoretical using solar dryer system. The drying experiments were conducted at seven different drying mass flow rates varied between 0.0015 and 0.036 kg s−1. As results of the drying experiments were conducted at different drying mass flow rates, it was shown that the drying time was decreased with the drying mass flow rate. This paper also presents a new mathematical modeling of thin layer solar drying of mulberry samples. In order to estimate the suitable form of solar drying curves, 10 different mathematical models to be in the literature and new model were applied to the experimental data and compared according to their correlation coefficients (R) and chi-squared (χ2), which were predicted by non-linear regression analysis using the Statistica Computer Program. It was concluded that the Midilli model and the newly developed model represent drying characteristics better than the other models. The effective moisture diffusivity values were in the range 3.47×10−12–1.46×10−9 m2 s−1. Copyright © 2009 John Wiley & Sons, Ltd.

28 April 2008 in International Journal of Energy Research
Verified
Journal Article
Closed access
PDF file
ADAydın Dikici
Aydın Dikici
AAAbdullah Akbulut
Abdullah Akbulut
In this study heat pump systems having different heat sources were investigated experimentally. Solar-assisted heat pump (SAHP), ground source heat pump (GSHP) and air source heat pump (ASHP) systems for domestic heating were tested. Additionally, their combination systems, such as solar-assisted-ground source heat pump (SAGSHP), solar-assisted-air source heat pump (SAASHP) and ground–air source heat pump (GSASHP) were tested. All the heat pump systems were designed and constructed in a test room with 60 m2 floor area in Firat University, Elazig (38.41°N, 39.14°E), Turkey. In evaluating the efficiency of heat pump systems, the most commonly used measure is the energy or the first law efficiency, which is modified to a coefficient of performance for heat pump systems. However, for indicating the possibilities for thermodynamic improvement, inadequate energy analysis and exergy analysis are needed. This study presents an exergetic evaluation of SAHP, GSHP and ASHP and their combination systems. The exergy losses in each of the components of the heat pump systems are determined for average values of experimentally measured parameters. Exergy efficiency in each of the components of the heat pump systems is also determined to assess their performances. The coefficient of performance (COP) of the SAHP, GSHP and ASHP were obtained as 2.95, 2.44 and 2.33, whereas the exergy losses of the refrigerant subsystems were found to be 1.342, 1.705 and 1.942 kW, respectively. The COP of SAGSHP, SAASHP and GSASHP as multiple source heat pump systems were also determined to be 3.36, 2.90 and 2.14, whereas the exergy losses of the refrigerant subsystems were approximately 2.13, 2.996 and 3.113 kW, respectively. In addition, multiple source heat pump systems were compared with single source heat pump systems on the basis of the COP. Exergetic performance coefficient (EPC) is introduced and is applied to the heat pump systems having various heat sources. The results imply that the functional forms of the EPC and first law efficiency are different. Results show that Exloss,total becomes a minimum value when EPC has a maximum value. Copyright © 2008 John Wiley & Sons, Ltd.