Oil spilling has been a serious problem in the world for a long time, which can bring toxic substances to marine life. A large number of researchers around the world have introduced many measures to address this problem. One of the effective methods to remove oil from the oil/water mixture is to absorb oil from the mixture. Here, we prepared porous poly(lactic acid) (PLA) membranes using the electrospinning approach with different sized syringe needles, and used these membranes to absorb oil from the top of the water. It was found that the diameter of the needle has a big impact on the size and structure of the pores on the PLA fibers. The oil absorption capacity of membranes increases with a decreasing needle diameter due to the increased pore volume and specific surface area. The highest absorption capacity reached was 42.38 g/g for vacuum pump oil, 28.17 g/g for peanut oil, and 6.74 g/g for diesel oil.

The development of gas sensors for detecting alcoholic vapors with a low molecular weight is essential for environmental protection, industrial process control, and the monitoring of the living atmosphere in daily life to avoid health problems in human beings. Here, poly (lactic acid) (PLA)/shellac/PLA sandwich-structural membranes were fabricated via an electrospinning approach and the interaction with alcoholic vapors with a low molecular weight was investigated. It was found that the PLA/shellac/PLA sandwich-structural membrane exhibited fast response to the alcoholic vapors with low molecular weight, especially for methanol vapor. After being treated with alcohol vapor with a low molecular weight, the PLA/shellac/PLA sandwich-structural membrane could change its transmission in a short time (~5 s) and with a concentration of 10 wt% of methanol (ethanol) in water. In the meantime, the PLA/shellac/PLA sandwich-structural membrane can hopefully be potentially used again after evaporating the alcoholic vapor at an elevated temperature.