Well-logging is an important formation characterization and resource evaluation method in oil and gas exploration and development. However, there has been a shortage of well-logging data because Well-logging can only be measured by expensive and time-consuming field tests. In this study, we aimed to find effective machine learning techniques for well-logging data prediction, considering the temporal and spatial characteristics of well-logging data. To achieve this goal, the convolutional neural network (CNN) and the long short-term memory (LSTM) neural networks were combined to extract the spatial and temporal features of well-logging data, and the particle swarm optimization (PSO) algorithm was used to determine hyperparameters of the optimal CNN-LSTM architecture to predict logging curves in this study. We applied the proposed CNN-LSTM-PSO model, along with support vector regression, gradient-boosting regression, CNN-PSO, and LSTM-PSO models, to forecast photoelectric effect (PE) logs from other logs of the target well, and from logs of adjacent wells. Among the applied algorithms, the proposed CNN-LSTM-PSO model generated the best prediction of PE logs because it fully considers the spatio-temporal information of other well-logging curves. The prediction accuracy of the PE log using logs of the adjacent wells was not as good as that using the other well-logging data of the target well itself, due to geological uncertainties between the target well and adjacent wells. The results also show that the prediction accuracy of the models can be significantly improved with the PSO algorithm. The proposed CNN-LSTM-PSO model was found to enable reliable and efficient Well-logging prediction for existing and new drilled wells; further, as the reservoir complexity increases, the proxy model should be able to reduce the optimization time dramatically.

In the process of developing tight oil and gas reservoirs, multistage fractured horizontal wells (NFHWs) can greatly increase the production rate, and the optimal design of its fracturing parameters is also an important means to further increase the production rate. Accurate production prediction is essential for the formulation of effective development strategies and development plans before and during project execution. In this study, a novel workflow incorporating machine learning (ML) and particle swarm optimization algorithms (PSO) is proposed to predict the production rate of multi-stage fractured horizontal wells in tight reservoirs and optimize the fracturing parameters. The researchers conducted 10,000 numerical simulation experiments to build a complete training and validation dataset, based on which five machine learning production prediction models were developed. As input variables for yield prediction, eight key factors affecting yield were selected. The results of the study show that among the five models, the random forest (RF) model best establishes the mapping relationship between feature variables and yield. After verifying the validity of the Random Forest-based yield prediction model, the researchers combined it with the particle swarm optimization algorithm to determine the optimal combination of fracturing parameters under the condition of maximizing the net present value. A hybrid model, called ML-PSO, is proposed to overcome the limitations of current production forecasting studies, which are difficult to maximize economic returns and optimize the fracturing scheme based on operator preferences (e.g., target NPV). The designed workflow can not only accurately and efficiently predict the production of multi-stage fractured horizontal wells in real-time, but also be used as a parameter selection tool to optimize the fracture design. This study promotes data-driven decision-making for oil and gas development, and its tight reservoir production forecasts provide the basis for accurate forecasting models for the oil and gas industry.

One of the main applications of carbon capture, utilization, and storage (CCUS) technology in the industry is carbon-dioxide-enhanced oil recovery (CO₂-EOR). However, accurately and rapidly assessing their application potential remains a major challenge. In this study, a numerical model of the CO₂-WAG technique was developed using the reservoir numerical simulation software CMG (Version 2021), which is widely used in the field of reservoir engineering. Then, 10,000 different reservoir models were randomly generated using the Monte Carlo method for numerical simulations, with each having different formation physical parameters, fluid parameters, initial conditions, and injection and production parameters. Among them, 70% were used as the training set and 30% as the test set. A comprehensive analysis was conducted using eight different machine learning regression methods to train and evaluate the dataset. After evaluation, the XGBoost algorithm emerged as the top-performing method and was selected as the optimal approach for the prediction and optimization. By integrating the production prediction model with a particle swarm optimizer (PSO), a workflow for optimizing the CO₂-EOR parameters was developed. This process enables the rapid optimization of the CO₂-EOR parameters and the prediction of the production for each period based on cumulative production under different geological conditions. The proposed XGBoost-PSO proxy model accurately, reliably, and efficiently predicts production, thereby making it an important tool for optimizing CO₂-EOR design.

Carbon dioxide corrosion is a pervasive issue in pipelines and the petroleum industry, posing substantial risks to equipment safety and longevity. Accurate prediction of corrosion rates and severity is essential for effective material selection and equipment maintenance. This paper begins by addressing the limitations of traditional corrosion prediction methods and explores the application of machine learning algorithms in ${\mathrm{C}\mathrm{O}}_2$ corrosion prediction. Conventional models often fail to capture the complex interactions among multiple factors, resulting in suboptimal prediction accuracy, limited adaptability, and poor generalization. To overcome these limitations, this study systematically organized and analyzed the data, performed a correlation analysis of the data features, and examined the factors influencing corrosion. Subsequently, prediction models were developed using six algorithms: Random Forest (RF), K-Nearest Neighbors (KNN), Gradient Boosting Decision Tree (GBDT), Support Vector Machine (SVM), XGBoost, and LightGBM. The results revealed that SVM exhibited the lowest performance on both training and test sets, while RF achieved the best results with R² values of 0.92 for the training set and 0.88 for the test set. In the classification of corrosion severity, RF, LightGBM, SVM, and KNN were utilized, with RF demonstrating superior performance, achieving an accuracy of 99% and an F1-score of 0.99. This study highlights that machine learning algorithms, particularly Random Forest, offer substantial potential for predicting and classifying ${\mathrm{C}\mathrm{O}}_2$ corrosion. These algorithms provide innovative approaches and valuable insights for practical applications, enhancing predictive accuracy and operational efficiency in corrosion management.

Oil production from tight oil reservoirs has become economically feasible because of the combination of horizontal drilling and multistage hydraulic fracturing. Optimal fracture design plays a critical role in successful economical production from a tight oil reservoir. However, many complex parameters such as fracture spacing and fracture half-length make fracturing treatments costly and uncertain. To improve fracture design, it is essential to determine reasonable ranges for these parameters and to evaluate their effects on well performance and economic feasibility. In traditional analytical and numerical simulation methods, many simplifications and assumptions are introduced for artificial fracture characterization and gas percolation mechanisms, and their implementation process remains complicated and computationally inefficient. Most previous studies on big data-driven fracturing parameter optimization have been based on only a single output, such as expected ultimate recovery, and few studies have integrated machine learning with evolutionary algorithms to optimize fracturing parameters based on time-series production prediction and economic objectives. This study proposed a novel approach, combining a data-driven model with evolutionary optimization algorithms to optimize fracturing parameters. We established a significant number of static and dynamic data sets representing the geological and developmental characteristics of tight oil reservoirs from numerical simulation. Four production-prediction models based on machine-learning methods—support vector machine, gradient-boosted decision tree, random forest, and multilayer perception—were constructed as mapping functions between static properties and dynamic production. Then, to optimize the fracturing parameters, the best machine-learning-based production predictive model was coupled with four evolutionary algorithms—genetic algorithm, differential evolution algorithm, simulated annealing algorithm, and particle swarm optimization—to investigate the highest net present value (NPV). The results show that among the four production-prediction models established, multilayer perception (MLP) has the best prediction performance. Among the evolutionary algorithms, particle swarm optimization (PSO) not only has the fastest convergence speed but also the highest net present value. The optimal fracturing parameters for the study area were identified. The hybrid MLP-PSO model represents a robust and convenient method to forecast the time-series production and to optimize fracturing parameters by reducing manual tuning.

Fractured reservoirs are distributed widely over the world, and describing fluid flow in fractures is an important and challenging topic in research. Discrete fracture modeling (DFM) and equivalent continuum modeling are two principal methods used to model fluid flow through fractured rocks. In this paper, a novel method, embedded discrete fracture modeling (EDFM), is developed to compute equivalent permeability in fractured reservoirs. This paper begins with an introduction on EDFM. Then, the paper describes an upscaling procedure to calculate equivalent permeability. Following this, the paper carries out a series of simulations to compare the computation cost between DFM and EDFM. In addition, the method is verified by embedded discrete fracture modeling and fine grid methods, and grid-block and multiphase flow are studied to prove the feasibility of the method. Finally, the upscaling procedure is applied to a three-dimensional case in order to study performance for a gas injection problem. This study is the first to use embedded discrete fracture modeling to compute equivalent permeability for fractured reservoirs. This paper also provides a detailed comparison and discussion on embedded discrete fracture modeling and discrete fracture modeling in the context of equivalent permeability computation with a single-phase model. Most importantly, this study addresses whether this novel method can be used in multiphase flow in a reservoir with fractures.