Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.

Immunomagnetic separation is the laboratory method used to separate targets from heterogeneous samples. It has been applied to separate or detect target entity existing rarely in the sample solution. In this study, a new type of microfluidic device with a 3D micromagnet array was designed, and it was demonstrated that this microfluidic device could be applied to immunomagnetic separation. As the 3D micromagnet is embedded in the microchannel, the height of the microchannel is extended to several hundred micrometers, and the magnetic field pulling the target can be confined to a limited region within the microchannel. Immunomagnetic separation using a microfluidic device was experimentally confirmed by fluorescence imaging. The capture efficiency was maximally 94.9% in the experimental study using the streptavidin-biotin binding of microbeads of the diameter of 1 µ m. As a result, the microfluidic device with micromagnet arrays provides new solution for point-of-care device for immunomagnetic separation.

Molding processes with molds containing topographical structures have been used for fabrication of hydrogel and cryogel particles. However, they can involve difficulties in separation of fabricated particles with complex shape from the molds or repeated fabrication of the particles although the overall processes do not require much skill and equipment. In this study, molds with etched superhydrophobic patterns have been developed by etching polytetrafluoroethylene (PTFE) blocks in user-defined designs with a femtosecond (FS) laser-based etching system. Lyophilized cryogel particles with various designs and sizes were fabricated by molding precursors with these PTFE molds. Additionally, the clean and easy separation of particles from the molds allowed repeated fabrication of the particles. For an application, relatively ‘big’ gelatin-norbornene (GelNB) cryogel particles prepared via molding with polydimethylsiloxane (PDMS) molds, swelling in phosphate buffered saline (PBS) and slicing height in half and ‘small’ GelNB cryogel particles fabricated with the PTFE molds were fabricated. Then, they were used to study scaffold size effect on calvarial bone regeneration. The molds generated with the FS laser-based etching system can be useful for various applications that require the mass production of cryogel particles in various geometries.

Light reflectance of blood is a complex phenomenon affected by hematocrit and red blood cell (RBC) aggregation (rouleaux formation). According to the hypothesis that RBC rouleaux are aligned with the direction of blood flow, the spatial alignment of RBC rouleaux, as well as their size and quantity in the blood, may also affect light reflectance. The present study aims to investigate the effect of the spatial alignment and distribution of RBC rouleaux on light reflection using optical coherence tomography (OCT). Blood flow velocity and reflectance profiles in a rat jugular-femoral bypass loop were simultaneously measured using a Doppler swept-source OCT system at various incident angles from −30 to +30 deg. The reflectance profiles of flowing blood show nonmonotonous decay with a local negative peak at the center of the tube. The profiles vary depending on the incident angle. This angular dependence is stronger at a higher angle of incidence. The anisotropic reflectance of flowing blood is consistent with the hypothesis on the spatial alignment of RBC rouleaux.