In this review paper, a comprehensive study on the concept, theory, and applications of composite right/left-handed transmission lines (CRLH-TLs) by considering their use in antenna system designs have been provided. It is shown that CRLH-TLs with negative permittivity (ε < 0) and negative permeability (μ < 0) have unique properties that do not occur naturally. Therefore, they are referred to as artificial structures called "metamaterials". These artificial structures include series left-handed (LH) capacitances (CL), shunt LH inductances (LL), series right-handed (RH) inductances (LR), and shunt RH capacitances (CR) that are realized by slots or interdigital capacitors, stubs or via-holes, unwanted current flowing on the surface, and gap distance between the surface and ground-plane, respectively. In the most cases, it is also shown that structures based on CRLH metamaterial-TLs are superior than their conventional alternatives, since they have smaller dimensions, lower-profile, wider bandwidth, better radiation patterns, higher gain and efficiency, which make them easier and more cost-effective to manufacture and mass produce. Hence, a broad range of metamaterial-based design possibilities are introduced to highlight the improvement of the performance parameters that are rare and not often discussed in available literature. Therefore, this survey provides a wide overview of key early-stage concepts of metematerial-based designs as a thorough reference for specialist antennas and microwave circuits designers. To analyze the critical features of metamaterial theory and concept, several examples are used. Comparisons on the basis of physical size, bandwidth, materials, gain, efficiency, and radiation patterns are made for all the examples that are based on CRLH metamaterial-TLs. As revealed in all the metematerial design examples, foot-print area decrement is an important issue of study that have a strong impact for the enlargement of the next generation wireless communication systems.

This paper presents a study of a planar antenna-array inspired by the metamaterial concept where the resonant elements have sub-wavelength dimensions for application in microwave medical imaging systems for detecting tumors in biological tissues. The proposed antenna consists of square-shaped concentric-rings which are connected to a central patch through a common feedline. The array structure comprises several antennas that are arranged to surround the sample breast model. One antenna at a time in the array is used in transmission-mode while others are in receive-mode. The antenna array operates over 2-12 GHz amply covering the frequency range of existing microwave imaging systems. Measured results show that compared to a standard patch antenna array the proposed array with identical dimensions exhibits an average radiation gain and efficiency improvement of 4.8 dBi and 18%, respectively. The average reflection-coefficient of the array over its operating range is better than S11 ≤-20 dB making it highly receptive to weak signals and minimizing the distortion encountered with the transmission of short duration pulse-trains. Moreover, the proposed antenna-array exhibits high-isolation on average of 30dB between radiators. This means that antennas in the array (i) can be closely spaced to accommodate more radiators to achieve higher-resolution imaging scans, and (ii) the imagining scans can be done over a wider frequency range to ascertain better contrast in electrical parameters between malignant tumor-tissue and the surrounding normal breast-tissue to facilitate the detection of breast-tumor. It is found that short wavelength gives better resolution. In this experimental study a standard biomedical breast model that mimics a real-human breast in terms of dielectric and optical properties was used to demonstrate the viability of the proposed antenna over a standard patch antenna in the detection and the localization of tumor. These results are encouraging for clinical trials and further refinement of the antenna-array.

This article investigates the feasibility of designing a high-gain on-chip antenna on silicon technology for sub-terahertz applications over a wide frequency range. High-gain is achieved by exciting the antenna using an aperture fed mechanism to couple electromagnetics energy from a metal slot-line, which is sandwiched between the silicon and polycarbonate substrates, to a 15-element array comprising circular and rectangular radiation patches fabricated on the top surface of the polycarbonate layer. An open ended microstrip line, which is orthogonal to the metal slot-line, is implemented on the underside of the silicon substrate. When the open ended microstrip line is excited it couples the signal to the metal slot-line which is subsequently coupled and radiated by the patch array. Measured results show the proposed on-chip antenna exhibits a reflection coefficient of less than -10 dB across 0.290 THz to 0.316 THz with a highest gain and radiation efficiency of 11.71 dBi and 70.8%, respectively, occurred at 0.3THz. The antenna has a narrow stopband between 0.292 THz to 0.294 THz. The physical size of the presented sub-terahertz on-chip antenna is 20 3.5 0.126mm3.

In this paper a metamaterial-inspired T-matching network is directly imbedded inside the feedline of a microstrip antenna to realize optimum power transfer between the front-end of an RF wireless transceiver and the antenna. The proposed T-matching network, which is composed of an arrangement of series capacitor, shunt inductor, series capacitor, exhibits left-handed metamaterial characteristics. The matching network is first theoretically modelled to gain insight of its limitations. It was then implemented directly in the 50- Ω feedline to a standard circular patch antenna, which is an unconventional methodology. The antenna's performance was verified through measurements. With the proposed technique there is 2.7 dBi improvement in the antenna's radiation gain and 12% increase in the efficiency at the center frequency, and this is achieved over a significantly wider frequency range by a factor of approximately twenty. Moreover, there is good correlation between the theoretical model, method of moments simulation, and the measurement results.

This letter describes a simple beam-tilting technique for an end-fire antenna using only a single-layer Frequency Selective Surface (FSS). The proposed approach is based on placing a parasitic FSS element under the antenna to tilt the beam in the desired direction. This is achieved by using a modified uniplanar compact FSS (MUC-FSS). To demonstrate the principle, the periodic structure is applied to a Yagi-Uda antenna operating in the millimeter-wave frequency band from 28 to 31 GHz. The measured results, by integrating the proposed FSS (1 layer of 3x5 unit cells) under the directors of the antenna, show that at 30 GHz, the main beam radiation tilts the end-fire direction (YZ plane) by +23° and -29° when the FSS structure is rotated by 90°, respectively. The simplicity of this method makes it suitable for 5G communication networks.

In this Letter, a new frequency-selective absorber (FSA) is presented that has wide-band transmission/absorption/reflection reduction responses. The presented absorber is completed by lossy cross-dog bone and lossless second-order frequency-selective surfaces (FSSs). The modal interaction pole generated by the lossy array is employed to achieve a wide-band transmission. Three absorption bands are combined to realize a continuous stop-band with high absorptivity. Furthermore, the improved absorber structure is investigated to reduce the strong reflection between the absorption and transmission bands. The 10 dB reflection reduction is obtained with a fractional bandwidth of 126.4%. Meanwhile, the - 3 dB fractional pass-band width is 41.3% with minimum insertion loss (IL) of 0.37 dB. The absorption bandwidth of 91.5% is provided with at least 90% absorptivity. The distance between the lossy and lossless layers is only 0.08 $\lambda_L$ L at the lowest operating frequency. Finally, the proposed design is validated by a good agreement between the numerical simulations and experimental measurements.