Stability is one of the major challenges of organic–inorganic hybrid perovskite materials (APbX3, where A = MA+, FA+ and Cs+, and X = I−, Br− and Cl−, respectively) in optoelectronic device applications. APbX3 materials are extremely sensitive to temperature, humidity and oxygen. Although degradation of the materials caused by oxygen and moisture could be partially solved by encapsulation techniques, further improving the stability of perovskites under external heat is still demanding. Generally, APbX3 would decompose into AX and PbX2 at the early stage, when it is in a high-temperature environment. In this contribution, we demonstrated that pressure can reinforce the thermal stability of MAPbX3, by promoting the reverse reaction. The stability reinforcement of MAPbI3 by mechanical forces was found to be more effective compared with that of MAPbBr3/MAPbCl3. Furthermore, we carried out quantitative research to mimic pressure induced reverse reactions, through dry-grinding the powder mixtures of equimolar PbX2 and AX. We found that the conversion yields and reaction paths were dramatically different depending on the type of organic-cation (A) and halide (X). APbI3, CsPbBr3 and CsPbCl3 can be directly and completely synthesized by the dry grinding method, and thus they are more promising candidates for material recovery by external forces. Meanwhile, it was found that CsPbBr3 and CsPbCl3 crystalize via Cs4PbX6 (X = Br or Cl) intermediate states. Our results provide a robust strategy for the specific design of perovskite material based optoelectronic devices, especially for applications demanding better stability.
CuO/ZnO heterojunction nanorod arrays were synthesized using a facile photochemical deposition strategy. The morphology of CuO was related to the concentration of Cu2+ in the Cu(NO3)2 solution, UV illumination time, and the air annealing temperature. A possible reaction mechanism was proposed. In the photochemical deposition process, the OH− was generated in the vicinity of the ZnO nanorod arrays and reacted with Cu2+ and NO3− in the solution to form Cu2(NO3)(OH)3/ZnO heterojunction nanorod arrays firstly, which were converted into CuO/ZnO heterojunction nanorod arrays completely after air annealing at a low temperature. The fabricated CuO/ZnO heterojunction nanorod arrays exhibits a well-defined rectifying characteristic and an improved photo-response performance compared with pure ZnO nanorod arrays.
4 September 2017 in Physical Chemistry Chemical Physics
We prepared high-performance photoresistors based on CH3NH3PbI3 films with a high PbI2 doping level. The role of PbI2 in CH3NH3PbI3 perovskite thin film was systematically investigated using scanning electron microscopy, X-ray diffraction, time-resolved photoluminescence spectroscopy, and photoconductive atomic force microscope. Laterally-structured photodetectors have been fabricated based on CH3NH3PbI3 perovskite thin films deposited using precursor solution with various CH3NH3I:PbI2 ratios. Remarkably, the introduction of a suitable amount of PbI2 can significantly improve the performance and stability of perovskite-based photoresistors, optoelectronic devices with ultrahigh photo-sensitivity, high current on/off ratio, fast photo response speed, and retarded decay. Specifically, a highest responsivity of 7.8 A/W and a specific detectivity of 2.1 × 1013 Jones with a rise time of 0.86 ms and a decay time of 1.5 ms have been achieved. In addition, the local dependence of photocurrent generation in perovskite thin films was revealed by photoconductive atomic force microscopy, which provides direct evidence that the presence of PbI2 can effectively passivate the grain boundaries of CH3NH3PbI3 and assist the photocurrent transport more effectively.
We fabricated a high performance self-powered photoelectrochemical cell (PECC) type UV photodetector with ZnO nanorod arrays (NRs) as the photoanode, [Co(bpy)3]3+/2+ as the electrolyte and ITO glass coated by polymer poly(3,4-ethylenedioxythiophene) (PEDOT), PEDOT/ITO, as the counter electrode (CE). The UV photodetector shows a good photovoltaic performance (VOC = 0.5 V, ISC = 6.2 μA) and a high photosensitivity of 263 under the illumination of 365 nm UV light with an intensity of 2 mW cm−2. The device also shows a high response speed (response time < 0.2 s). The high photosensitivity and rapid response speed are attributed to the good electrocatalytic activity of PEDOT towards Co-complex redox shuttle. The high performance of the detector, together with the Pt-free low cost CE and the facile fabricating method, makes the device promising in optoelectronic applications.