The ingress of chloride ions in a harsh chloride environment leads to the corrosion of reinforcing steel bars and reduction in the service life of concrete structures. Prediction of the service life of chloride-exposed concrete structures is strongly dependent on chloride diffusion coefficient, which in turn is influenced by several factors including materials and environmental parameters, binding of chloride ions to the solid phase of concrete, and the stresses caused by external load acting on the structure. The diffusion of chloride in concrete is increased significantly by damage associated with load-induced stress, which, if not taken into account, can lead to erroneous prediction of the service life. This paper investigates the impact of compressive stress-induced damage on chloride transport in concrete. An experimental investigation involving non-steady-state migration test as per NT BUILD 492 was carried out on unloaded concrete specimens damaged under axial compressive load. Numerical si...
Cement manufacturing is indeed a major contributor to global warming that involves energy-intensive production processes along with emitting huge greenhouse gasses into the atmosphere. To adopt sustainable construction practices, agro-industrial waste materials as supplementary cementitious materials (SCMs) have been used by numerous researchers to partially replace conventional ordinary Portland cement (OPC) with SCMs by evaluating its optimum replacement dosage. This study aims to: (1) highlight the background of the date palm tree and the application of date palm waste as a construction material; (2) optimizing the dosage of date palm ash (DPA) as a cementitious material, at the replacement level of 10%, 20%, and 30%; and (3) understand the reaction kinetics by way of characterization techniques. DPA-based binary mixes were compared with each other and with the control (100% OPC mix) through fresh, mechanical, durability, and microstructural properties. The mechanism of reaction at early- and long-term period of curing was studied by characterization tests on paste, including nitrogen adsorption test (BET), X-ray diffraction (XRD), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FT-IR). The outcome revealed 10% DPA as a strong and durable substitute to OPC, by formation of more Calcium Silicate Hydrate (C-S-H) and Calcium Aluminosilicate Hydrate (C-A-S-H) gel, whereas up to 30% DPA replacement can further maximize clinker replacement with reasonable performance, together with enhanced sustainability and reduced construction cost.
1 April 2014 in Journal of Materials in Civil Engineering